- radial topology
- built-in cable loss correction
- groups of outputs with different output levels
- isolation between outputs better than 25dB
- powering of optional terrestrial TV preamplifier
- built-in power supply
- LNB powered through H lines
| Name |
| MSR-908 | MSR-912 | MSR-916 | ||
| Code |
| R70808 | R70812 | R70816 | ||
| Number of outputs |
| 8 | 12 | 16 | ||
| Frequency range | SAT TV | MHz | 950-2400 | |||
| Terrestrial TV | MHz | 47-862 | ||||
| Gain (typical cable loss correction) | Section 1 (10dB adjustment) | Output 1-4 | dB | 7-12 | ||
| Output 5-8 | dB | 6-10 | ||||
| Output 9-12 | dB | - | 5-8 | |||
| Output 13-16 | dB | - | 4-6 | |||
| Terr. TV path (20dB adjustment) | Output 1-4 | dB | 3-7 | |||
| Output 5-8 | dB | 2-5 | ||||
| Output 9-12 | dB | - | 1-3 | |||
| Output 13-16 | dB | - | 0-1 | |||
| Maximum output level - SAT IF (IMD3=35dB) | dB | 93 | ||||
| Maximum output level - terrestrial TV path (DIN45004B) | Wyjścia 1-4 | dB | 91 | 91 | 91 | |
| Wyjścia 5-8 | dB | 88 | 88 | 88 | ||
| Wyjścia 9-12 | dB | - | 86 | 86 | ||
| Wyjścia 13-16 | dB | - | - | 83 | ||
| Isolation between SAT inputs | dB | >25 | ||||
| Isolation between outputs | dB | >25 | ||||
| Crosstalk attenuation | TV/SAT | dB | >=24 | |||
| SAT/TV | dB | >=45 | ||||
| DC voltages at outputs | V | H/Lo, H/Hi: 18; V/Lo, V/Hi: 14; terr. TV 12 | ||||
| DC current consumption | total | A | <1 | |||
| 14V & 12V | A | <0.5 | ||||
| Maximum current supplying terrestrial TV preamp. (at 12V) | mA | 100 | ||||
| Current consumption (from receiver's input) | mA | <60 | ||||
| Control signals |
| 14/18V, 0/22kHz, Tone Burst or DiSEqC 2.0 | ||||
| Power consumption | W | max 30 | ||||
| Operating temperature | C | -20...+50 | ||||
| Dimensions / weight | mm/kg | 244.5x128x53/0.9 | 284.5x128x53/1 | 324.5x128x53/1.1 | ||
- 18 V DC at H,lo and H,Hi
- 14 V DC at V,lo and V,Hi
- 12 V DC at terrestrial signal input, suitable for powering an antenna preamplifier.












