Kód zboží: F1211
Produkt již není k dispozici
Nabídka: Knihovna:

Podrobný popis

One-channel Relay & One-channel Sender: F&Home Radio rH-R1S1
View of the device

One-channel Relay & One-channel Sender: F&Home Radio rH-R1S1
Top view

The rH-R1S1 module is a combined single relay with transmitter and contact input. The module sends information about the opening and closing of the contact to the system and controls the relay, which can switch on any electrical circuit. Communication with the server takes place by means of radio. The module has a physical input for the connection of one monostable potential free contact as well as one relay switch. The load can be resistive, inductive or capacitive, in both AC and DC circuits. The rH-R1S1 is particularly suitable for controlling a ventilation fan, lighting and the activation of wall outlets.

Symbol in design and configuration software:
The symbol of rH-R1S1
The rH-R1S1 module is represented by object that consists of one binary (two-state) input and relay output. The input controls the relay, and the output provides information about the state of the relay. Additionally, the object has one digital input and output. Shorting or opening of the contact changes the logic state of the output.
Installation:
  • Switch off the AC line and make sure that there is no voltage.
  • Connect the wires according to the diagram above.
  • Mount the module in a suitable installation box.
  • Adjust the antenna wire parallel to one of the server antennas, as far as possible from the other wires.
  • Switch on the AC line.
  • Register the device in the system.
  • Close the installation box.
In the diagram above the rH-R1S1 module is connected with a monostable switch and a lamp.
Example applications:
In the diagram above, in the case of motion detection the F1810 sensor provides logic state "1" and the relay of the F1211 module switches on the lamp. The second channel of the F1211 module can be used e.g. for switching light in another room.
In the diagram above, in the case of motion detection the F1802 motion and temperature sensor provides logic state "1" and the relay of the F1211 module switches on the lamp. Additionally, the tº output can be used to control a heater, air conditioning system etc. The second channel of the F1211 module can be used e.g. for switching light in another room.
A more advanced scheme for lighting control can be found in the Lighting control project article.

About the system:
Specifications
Name F&Home Radio  rH-R1S1
Code F1211
Power 230 VAC / 50 Hz
RF communication band [MHz] 868
Communication mode two-way
Data encryption YES
Open space range 100 m
Load 1x 4A / 250 VAC
Relay input (triggered by L or N level) 1x (contact)
Operating temperature range
-20ºC ... +50ºC
Operating humidity / environment <= 85% (no condensation of
water vapor) / no aggressive gasses
Protection overheating
Dimensions [mm] 48x48x22
Ingress protection rating IP 20

 



Specifikace

Nazwa Moduł rH-R1S1
Kod F1211
Zasilanie AC 230 V 50 Hz
Łącze radiowe [MHz] 868
Rodzaj transmisji dwukierunkowa
Kodowanie TAK
Zasięg w otwartej przestrzeni 100 m
Odbiorniki 1 x 4A / AC 250V
Wejście wyzwalane poziomem L lub N 1x stykowe
Temperatura pracy -20...50 ºC
Wilogotność <= 85% (bez kondensacji pary i gazów agresywnych)
Zabezpieczenia przed przegrzaniem
Wymiary [mm] 48x48x22
Stopień ochrony IP 20