Kabely
Analogový systém
Cat 5 UTP Cable: NETSET UTP 5e
(indoor) [1m]
(indoor) [1m]
Kód zboží: E1408_1
NETSET BOX UTP 5e cable far exceeds the requirements for Category 5e twisted pair cables.
NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for data transmission systems inside buildings (LANs).
NETSET cable is the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.0 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
- highest-quality materials, strict technological discipline confirmed by a 6-year quality guarantee,
- parameters far exceeding the requirements for Category 5+ twisted pair cables
- preliminary quality control of materials and thorough tests of the final product,
- meter markers, printed error less than 0.5%,
- solid wires of 0.51 mm diameter (24 AWG),
- wire insulation made of homogeneous, colored PE; outer diameter: 0.88 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
- insulated wires twisted in pairs of 1.8 mm diameter,
- pairs twisted together, outer diameter of 4.0 mm,
- the sheath of the cable is made of gray PVC (RAL 7032), of 5.0 mm diameter,
NETSET UTP cat 5e E1408 LAN cable is manufactured in compliance with:
IEC 61156-6 (2000), ISO/IEC 11801 (2000), ANSI/TIA/EIA-568-A (1995), EN 50173 (1999), yd/t1019-2001 norms.
IEC 61156-6 (2000), ISO/IEC 11801 (2000), ANSI/TIA/EIA-568-A (1995), EN 50173 (1999), yd/t1019-2001 norms.
NETSET cables come with a 6-year warranty.
The manufacturer guarantees stability of the parameters given in the "Specifications" at least for six years, on the condition that the cable is packed, transported, installed, and used according to adequate European norms (among others: EN 50174-1), within the permissible environmental conditions (see the "Specifications" below).
The NETSET UTP cat 5e E1408 cable can be used in a wide temperature range: -20...+70 oC, and installed between 0 and +50 oC. Minimum bending radius factor (radius to diameter ratio) is 8.
Specifications
Name | NETSET UTP 5e |
Code | E1408 |
Structure | |
Conductors | solid copper wires Ø 0.50 mm (24 AWG) |
Wire insulation | PE |
Sheath | PVC (gray, RAL 7032) |
Outer diameter [mm] | 5.0 ±0.3 |
Copper content [kg/km] | 14.9 |
Weight [kg/km] | 28.5 |
Electrical parameters | |
Wave impedance [Ω] | 100 ±15 |
Capacitance of any transmission path at 1kHz [nF/km] | 50 ±1 |
Nominal Velocity of Propagation (NVP) [%] | 67 |
Resistance of any transmission path [Ω/km] | ≤ 188 |
Asymmetry in capacitance of transmission paths to the ground [pF/km] | ≤ 1600 |
Insulation resistance [MΩ/km] | > 500 |
Installation and operation | |
Operating temperature range [oC] | -20...+70 |
Operating humidity range [%] | 0...100 |
Installation temperature range [oC] | 0...+50 |
Minimum bending radius [radius to diameter ratio] | >8 |
NETSET BOX UTP CAT 5e cable has been tested by
Central Testing Laboratory
of the
National Institute of Telecommunications in Warsaw, Poland
and got
CERTIFICATE OF THE INSTITUTE
The certificate of the National Institute of Telecommunications for the NETSET UTP CAT5e cable is available here.
The results of the measurements of the NETSET UTP CAT 5e cable conducted by the
National Institute of Telecommunications in Warsaw, Poland
- Pair resistance testing.
Pair | Wire | Wire resistance [Ω/km] | Resistance asymetry [%] | |
UTP cat 5e | 1 | a | 93.6 | 0.2 |
b | 93.8 | |||
2 | a | 91.7 | 0.4 | |
b | 91,3 | |||
3 | a | 91.8 | 0.1 | |
b | 91,7 | |||
4 | a | 92.3 | 0.1 | |
b | 92.2 | |||
Required | - | - | ≤150 | ≤3.0 |
- Capacitance testing.
Pair | Capacitance [nF/km] | Capacitance asymmetry [pF/km] | |
UTP cat 5e | 1 | 49.55 | 217 |
2 | 48.19 | 26 | |
3 | 49.32 | 88 | |
4 | 47.28 | 229 | |
Required | - | ≤55 | ≤1600 |
- Insulation testing.
Pair | Wire | Insulation resistance [MΩ/km] | |
UTP cat 5e | 1 | a | 3.0 · 105 |
b | 2.8 · 105 | ||
2 | a | 7.6 · 105 | |
b | 7.7 · 105 | ||
3 | a | 5.4 · 105 | |
b | 5,1 · 105 | ||
4 | a | 7.7 · 105 | |
b | 7.0 · 104 | ||
Required | - | - | ≥150 |
- Tests of electric strength of insulation.
Test voltage | [VAC] | |
Applied | Required | |
1000 | 1000 |
- End-to-end attenuation testing.
Pair | Attenuation [dB] | |
UTP cat 5e | 1 | 23.6 |
2 | 24 | |
3 | 23.8 | |
4 | 24.2 | |
Required | - | ≤24.2 |
- Near End Cross Talk (NEXT) testing.
Pair to pair | NEXT [dB] | |
UTP cat 5e | 1-2 | 42.3 |
1-3 | 39.8 | |
1-4 | 44.1 | |
2-3 | 36.7 | |
2-4 | 38.8 | |
3-4 | 39.4 | |
Required | - | ≥34.0 |
- Return loss testing.
Pair | Return loss [dB] | |
UTP cat 5e | 1 | 22.7 |
2 | 29.1 | |
3 | 25.3 | |
4 | 22.1 | |
Required | - | ≥19.4 |
- Total Near End Cross Talk (PS-NEXT) testing.
Pair | PS-NEXT [dB] | |
UTP cat 5e | 1 | 36.94 |
2 | 33.93 | |
3 | 33.63 | |
4 | 35.44 | |
Required | - | ≥31.0 |
Transmission parameters
The diagrams show that NETSET UTP 5e E1408 fulfills all requirements for CAT 5e cables, with a large safety margin.
Price for 1m
Cat 5 UTP Cable: NETSET UTP 5e
(indoor) [1m]
(indoor) [1m]
Kód zboží: E1408_1