Cat 5e UTP Cable: NETSET UTP PE (outdoor) [1m]

Kód zboží: E1412_1
16,26 Kč
Cena s DPH Sleva Množství platnost
16,26 Kč 0 % od 1 ks.
Dostupný
NETSET UTP PE 5e E1412 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground. However, in the case of cabling operating in environments with increased humidity, the better choice is the gel-filled cable - NETSET UTPw 5e E1410.

Záruka

Záruka - 15 let.

Podrobný popis

Cat 5e UTP Cable: NETSET UTP PE (outdoor) [1m]
Close-up
NETSET UTP PE 5e E1412 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground. However, in the case of cabling operating in environments with increased humidity, the better choice is the gel-filled cable - NETSET UTPw 5e E1410.
The latest high-performance IP CCTV cameras require appropriate quality of transmission medium. High resolutions of the cameras are connected with high bandwidth requirements (especially in the case of megapixel devices). A very important feature of a UTP cable becomes the crosstalk between pairs.
Due to market demand DIPOL has introduced a new family of high-quality twisted-pair cables named NETSET.
The outer diameter of the NETSET UTP PE 5e cable has been reduced to 6.0 mm, which considerably facilitates laying of the cable in ducts and pipes. The insulation of the wires has been made of special PE, to make it easier to crimp RJ-45 connectors onto the cable.
Distinguishing features of NETSET UTP PE 5e cable:
  • highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
  • parameters far exceeding the requirements for Category 5+ twisted pair cables, confirmed by the tests performed in Central Testing Laboratory of the National Institute of Telecommunications in Warsaw, Poland,
  • preliminary quality control of materials and thorough tests of the final product,
  • meter markers - length error less than 0.5%,
  • solid wires of 0.50 mm diameter (24 AWG),
  • wire insulation made of homogeneous, colored PE; outer diameter: 1.01 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
  • insulated wires twisted in pairs of 2.02 mm diameter,
  • pairs twisted together,
  • sheath made of black PE, outer diameter of 6.0 mm.
NETSET UTP PE 5e E1412 cable is manufactured in compliance with EN 50173, ISO/IEC 61156-5 edition: 2002, ISO/IEC 11801 standards.
NETSET cables come with a 15-year warranty.


The manufacturer guarantees stability of the parameters given in the "Specifications" at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions (see the "Specifications" below).
NETSET UTP PE 5e E1412 cable can be used in a wide temperature range: -20o...+50oC, and installed between -30o...+50 oC.
The cable is also available in unreel box - E1412_305
Specifications
Name NETSET UTP PE 5e
Code E1412_1
STRUCTURE
Wires

solid copper conductors Ø 0.50 mm (24 AWG)

Wire insulation PE
Sheath PE (black)
Outer diameter [mm] 6.0
Copper content [kg/km] 14.2
Weight [kg/km]  33
ELECTRICAL PARAMETERS
Wave impedance [Ω] 100 ±15
Capacitance of any transmission path at 1kHz [nF/km]   ≤56
Nominal Velocity of Propagation (NVP) [%] 67
Resistance of any transmission path [Ω/km] ≤ 188
Asymmetry in capacitance of transmission paths to the ground [pF/km] ≤ 1600
Insulation resistance [MΩ/km] > 1000
INSTALLATION AND OPERATION
Operating temperature range [°C] -20...+50
Operating humidity range [%] 0...100
Installation temperature range [°C] -30...+50
Minimum bending radius (indoors)  [radius to diameter ratio] >8
NETSET BOX UTP CAT 5e cable has been tested by
Central Chamber for Telecommunications Testing of
National Institute of Telecommunications in Warsaw, Poland

and got
CERTIFICATE OF THE INSTITUTE

The results of the measurements of the NETSET BOX UTP PE 5e cable conducted by the
National Institute of Telecommunications in Warsaw, Poland
The results of NETSET BOX UTP CAT 5e tests performed by
National Institute of Telecommunications in Warsaw
  • Pair resistance testing.
  Pair Wire Wire resistance [Ω/km] Resistance asymmetry [%]
UTP cat. 5e
PE
1 a 87.320 0.22
b 87.136
2 a 84.663  0.20
b 84.831
3 a 85.082 0.21
b 84.903
4 a 86.035  0.18
b 86.192
Required - - ≤150  ≤3.0
  • Capacitance testing.
  Pair  Effective capacitance [nF/km] Capacitance asymmetry  [pF/km]
UTP cat. 5e
PE
1 51.74 208
2 49.21  116
3 49.79 7
4 50.85 13
Required - ≤55 ≤1600
  • Insulation testing.
  Pair Wire Insulation resistance [MΩ/km]
UTP kat. 5e
PE
1 a 4.5 · 105
b 4.8 · 105
2 a 6.6 · 105
b 4.6 · 105
3 a 4.9 · 105
b 5.8 · 105
4 a 4.5 · 105
b 7.0 · 104
Required - - ≥150
  • Tests of electric strength of insulation.
Test method  Test voltage [VAC]
Applied (passed)
Required
Voltage applied between connected in parallel all a wires and all b wires 1000 1000

  Pair Effective attenuation [dB]
UTP cat. 5e
PE
1 21.2
2 20.8
3 20.5
4 21.2
Required - ≤24.9
  • Near End Cross Talk (NEXT) testing.
  Pair to pair
NEXT [dB]
UTP cat. 5e
PE
1-2 47.3
1-3 52.6
1-4 55.4
2-3 54.8
2-4 55.5
3-4 60.2
Required - ≥34.0
  • Return loss testing.
  Pair Return loss [dB]

UTP cat. 5e
PE
1 20.7
2 21.8
3 22.4
4 21.5
Required - ≥19.4
  • Total Near End Cross Talk (PS-NEXT) testing.
  Pair PS-NEXT [dB]
UTP cat. 5e
PE
1 45.69
2 46.07
3 50.11
4 51.77
Required - ≥31.0
The parameters show that NETSET BOX UTP PE 5e fulfills all requirements for Category 5e cables, with a large safety margin.
Price for 1m

Specifikace

Name NETSET U/UTP Cat. 5e outdoor
Product type twisted-pair cable
Manufacturer DIPOL
Brand NETSET
Cable type U/UTP
Aplikace Externí
Category 5e
Cable length m Sold per meter
CPR class FCA
Fyzikální vlastnosti
Žila Material Cooper
Diameter mm +/-0.5
Conductor insulation Material HDPE (polyethylene)
Diameter mm
Twisted pairs colors white-brown/brown, white-blue/blue, white-orange/orange, white-green/green
sheath Material LDPE
Diameter mm
thickness mm
Color RAL9005 (black)
No
Nosný kabel No
Rip-cord Yes
Spline No
Length marker print error <0.5
Elektrické vlastnosti
Impedance Ω 100
Rychlost šíření NVP 67
Delay skew ns/100 m <45
DC resistance Ohm/100 m
Resistance asymmetry <5
Return Loss 1 MHz ≥dB 20
4 MHz ≥dB 23
8 MHz ≥dB
10 MHz ≥dB 25
16 MHz ≥dB 25
20 MHz ≥dB 25
25 MHz ≥dB
31.25 MHz ≥dB
62.5 MHz ≥dB
100 MHz ≥dB
Loss 1 MHz ≤dB 2
4 MHz ≤dB
8 MHz ≤dB
10 MHz ≤dB
16 MHz ≤dB
20 MHz ≤dB
25 MHz ≤dB
31.25 MHz ≤dB
62.5 MHz ≤dB 17
100 MHz ≤dB 22
NEXT (near-end crosstalk) 1 MHz ≤dB
4 MHz ≤dB
8 MHz ≤dB
10 MHz ≤dB
16 MHz ≤dB
20 MHz ≤dB
25 MHz ≤dB
31.25 MHz ≤dB
62.5 MHz ≤dB
100 MHz ≤dB
PSNEXT (power sum near-end crosstalk) 1 MHz ≥dB
4 MHz ≥dB
8 MHz ≥dB
10 MHz ≥dB
16 MHz ≥dB
20 MHz ≥dB
25 MHz ≥dB
31.25 MHz ≥dB
62.5 MHz ≥dB
100 MHz ≥dB
ELFEXT 1 MHz ≥dB
4 MHz ≥dB
8 MHz ≥dB
10 MHz ≥dB
16 MHz ≥dB
20 MHz ≥dB
25 MHz ≥dB
31.25 MHz ≥dB
62.5 MHz ≥dB
100 MHz ≥dB
PSELFEXT (power sum far-end crosstalk) 1 MHz ≥dB
4 MHz ≥dB
8 MHz ≥dB
10 MHz ≥dB
16 MHz ≥dB
20 MHz ≥dB
25 MHz ≥dB
31.25 MHz ≥dB
62.5 MHz ≥dB
100 MHz ≥dB
Mechanické vlastnosti
Provozní teplota °C -20...+70
Teplota pokládky °C -30...+50
Minimum bending radius for indoor installation Diameter >8