Cat 5 UTP Cable: NETSET UTPw 5e
(outdoor - gel-filled, black) [1m]

Kód zboží: E1410_1
18,59 Kč
Cena s DPH Sleva Množství platnost
18,59 Kč 0 % od 1 ks.
Dostupný
NETSET UTPw 5e E1410 is a top quality outdoor UTP cable (twisted-pair cable) designed for use in computer networks. Main features: - highest-quality materials, strict technological discipline confirmed by a 6-year quality guarantee; - preliminary quality control of materials and thorough tests of the final product; - meter markers; - solid wires of 0.51 mm diameter (24 AWG); - wire insulation made of homogeneous, colored PE; outer diameter: 1.02 mm; - insulated wires twisted in pairs of 2.04 mm diameter; - pairs twisted together, in gel, all twisted with PET foil, outer diameter of 4.4 mm; - sheath made of black modified PVC, outer diameter of 6.8 mm.

Záruka

Záruka - 15 let.

Podrobný popis

Cat 5 UTP Cable: NETSET UTPw 5e <br />(outdoor - gel-filled, black) [1m]
Close-up
The gel-filled NETSET UTP CAT 5e E1410_1 is a top quality twisted-pair cable designed for professional data transmission systems in environments with increased humidity, inside or outside buildings (structural wiring, LANs). Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. Center of the cable is filled with gel to prevent longitudinal water penetration in the cable. The cable put into ducts or trays can be even used in installations buried in the ground, in cable ducts or trays.
The latest high-performance IP CCTV cameras require appropriate quality of transmission medium. High resolutions of the cameras are connected with high bandwidth requirements (especially in the case of megapixel devices). A very important feature of a UTP cable becomes the crosstalk between pairs.
Due to market demand DIPOL has introduced a new family of high-quality twisted-pair cables named NETSET.
The outer diameter of the gel-filled NETSET UTP5e cable has been reduced to 6.0 mm, which considerably facilitates the laying of the cable in ducts and pipes. The insulation of the wires has been made of special PE, to make it easier to crimp RJ-45 connectors onto the cable.
Distinguishing features of NETSET UTPw Cat 5e:
  • highest-quality materials, strict technological discipline confirmed by a 6-year quality guarantee,
  • parameters far exceeding the requirements for Category 5+ twisted pair cables, confirmed by the tests performed in Central Testing Laboratory of the National Institute of Telecommunications in Warsaw, Poland,
  • preliminary quality control of materials and thorough tests of the final product,
  • meter markers - length error less than 0.5%,
  • solid wires of 0.50 mm diameter (24 AWG),
  • wire insulation made of homogeneous, colored PE; outer diameter: 1.01 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
  • insulated wires twisted in pairs of 2.02 mm diameter,
  • pairs twisted together, in gel,
  • sheath made of black PE, outer diameter of 6.0 mm.
NETSET UTP CAT 5e E1410_1 Ethernet cable is manufactured in compliance with EN 50173, ISO/IEC 61156-5 edition:2002, ISO/IEC 11801 norms.
NETSET cables come with a 6-year warranty.


The manufacturer guarantees stability of the parameters given in the "Specifications" at least for six years, on the condition that the cable is packed, transported, installed, and used according to adequate European norms (among others: EN 50174-1), within the permissible environmental conditions (see the "Specifications" below).
NETSET UTPw 5e E1410_1 cable can be used in a wide temperature range: -20...+50 oC, and installed between 0 and +50 oC.
The cable is also available in unreel box - E1410_305
Specifications
Name NETSET UTPw 5e gel-filled
Code E1410_1
STRUCTURE
Wires

solid copper conductors Ø 0.50 mm (24 AWG)

Wire insulation PE, gel
Sheath PE (black)
Outer diameter [mm] 6.0
Copper content [kg/km] 14.2
Weight [kg/km]  33
ELECTRICAL PARAMETERS
Wave impedance [Ω] 100 ±15
Capacitance of any transmission path at 1kHz [nF/km]   ≤56
Nominal Velocity of Propagation (NVP) [%] 67
Resistance of any transmission path [Ω/km] ≤ 188
Asymmetry in capacitance of transmission paths to the ground [pF/km] ≤ 1600
Insulation resistance [MΩ/km] > 1000
INSTALLATION AND OPERATION
Operating temperature range [°C] -20...+50
Operating humidity range [%] 0...100
Installation temperature range [°C] -30...+50
Minimum bending radius (indoors)  [radius to diameter ratio] >8
NETSET UTPw 5e cable has been tested by
Central Chamber for Telecommunications Testing of
National Institute of Telecommunications in Warsaw, Poland

and got:
CERTIFICATE OF THE INSTITUTE

  • Path (pair) resistance testing.
  Pair Wire Wire resistance [Ω/km] Resistance asymmetry [%]
UTPw 5e
gel-filled
1 a 87.320 0.22
b 87.36
2 a 84.663  0.20
b 84.831
3 a 85.082 0.21
b 84.903
4 a 86.035  0.18
b 86.192
Required - - ≤150  ≤3.0
  • Capacitance testing.
  Pair  Effective capacitance [nF/km] Capacitance asymmetry [pF/km]
UTPw 5e
gel-filled
1 51.74 208
2 49.21  116
3 49.79 7
4 50.85 13
Required - ≤55 ≤1600
  • Insulation testing.
  Pair Wire Insulation resistance [MΩ/km]
UTPw 5e
gel-filled
1 a 4.5 · 105
b 4.8 · 105
2 a 6.6 · 105
b 4.6 · 105
3 a 4.9 · 105
b 5.8 · 105
4 a 4.5 · 105
b 7.0 · 104
Required - - ≥150
  • Tests of electric strength of insulation.
Test method  Test voltage [VAC]
Applied (passed)
Required
Voltage applied between connected in parallel all a wires and all b wires 1000 1000
  • End-to-end attenuation testing.
  Pair Effective attenuation [dB]
UTPw 5e
gel-filled
1 21.2
2 20.8
3 20.5
4 21.2
Required - ≤24.9
  • Near End Cross Talk (NEXT) testing.
  Pair to pair
NEXT [dB]
UTPw 5e
gel-filled
1-2 47.3
1-3 52.6
1-4 55.4
2-3 54.8
2-4 55.5
3-4 60.2
Required - ≥34.0
  • Return loss testing.
  Pair Return loss [dB]

UTPw 5e
gel-filled
1 20.7
2 21.8
3 22.4
4 21.5
Required - ≥19.4
  • Total Near End Cross Talk (PS-NEXT) testing.
  Pair PS-NEXT [dB]
UTPw 5e
gel-filled
1 45.69
2 46.07
3 50.11
4 51.77
Required - ≥31.0
Transmission parameters
The parameters show that NETSET UTPw 5e fulfills all requirements for Category 5e cables, with a large safety margin.

Price for 1m

Specifikace

Name NETSET U/UTP cat. 5e outdoor, gel-filled
Product type twisted-pair cable
Manufacturer DIPOL
Brand NETSET
Cable type U/UTP
Aplikace Externí
Category 5e
Cable length m Sold per meter
CPR class FCA
Fyzikální vlastnosti
Žila Material Cooper
Diameter mm +/-0.5
Conductor insulation Material HDPE (polyethylene)
Diameter mm
Twisted pairs colors white-brown/brown, white-blue/blue, white-orange/orange, white-green/green
sheath Material LDPE
Diameter mm
thickness mm
Color RAL9005 (black)
Yes
Nosný kabel No
Rip-cord Yes
Spline No
Length marker print error <0.5
Elektrické vlastnosti
Impedance Ω 100
Rychlost šíření NVP 67
Delay skew ns/100 m <45
DC resistance Ohm/100 m
Resistance asymmetry <5
Return Loss 1 MHz ≥dB 19
4 MHz ≥dB 19
8 MHz ≥dB 19
10 MHz ≥dB 19
16 MHz ≥dB 19
20 MHz ≥dB 19
25 MHz ≥dB 18
31.25 MHz ≥dB
62.5 MHz ≥dB
100 MHz ≥dB 12
Loss 1 MHz ≤dB 3
4 MHz ≤dB
8 MHz ≤dB
10 MHz ≤dB
16 MHz ≤dB
20 MHz ≤dB
25 MHz ≤dB 10
31.25 MHz ≤dB
62.5 MHz ≤dB
100 MHz ≤dB 21
NEXT (near-end crosstalk) 1 MHz ≤dB 60
4 MHz ≤dB
8 MHz ≤dB 50
10 MHz ≤dB
16 MHz ≤dB
20 MHz ≤dB
25 MHz ≤dB
31.25 MHz ≤dB
62.5 MHz ≤dB
100 MHz ≤dB
PSNEXT (power sum near-end crosstalk) 1 MHz ≥dB 57
4 MHz ≥dB
8 MHz ≥dB 47
10 MHz ≥dB
16 MHz ≥dB
20 MHz ≥dB
25 MHz ≥dB
31.25 MHz ≥dB
62.5 MHz ≥dB
100 MHz ≥dB
ELFEXT 1 MHz ≥dB
4 MHz ≥dB
8 MHz ≥dB
10 MHz ≥dB
16 MHz ≥dB
20 MHz ≥dB
25 MHz ≥dB
31.25 MHz ≥dB
62.5 MHz ≥dB
100 MHz ≥dB
PSELFEXT (power sum far-end crosstalk) 1 MHz ≥dB
4 MHz ≥dB
8 MHz ≥dB
10 MHz ≥dB
16 MHz ≥dB
20 MHz ≥dB
25 MHz ≥dB
31.25 MHz ≥dB
62.5 MHz ≥dB
100 MHz ≥dB
Mechanické vlastnosti
Provozní teplota °C -20...+70
Teplota pokládky °C -30...+50
Minimum bending radius for indoor installation Diameter >8