MŮJ KOŠÍK
Můj košík je prázdný

Média konvertory

Multi mode

Ethernet Media Converter: TP-LINK MC200CM (multimode, 1000Mb/s, SC, 0.5km)
Kód zboží: L10224
Cena bez DPHCena s DPHSlevaplatnost  
1304,27 Kč1578,17 Kč0 %
Ethernet media converter TP-LINK MC200CM allows to change electrical signals (Ethernet data signal) coming via typical STP/UTP cable into modulated light signal transmitted via multimode fiber cable.
Ethernet Media Converter: TP-LINK MC200CM (multimode, 1000Mb/s, SC, 0.5km)
General view

Ethernet Media Converter: TP-LINK MC200CM (multimode, 1000Mb/s, SC, 0.5km)
Front view
Ethernet Media Converter: TP-LINK MC200CM (multimode, 1000Mb/s, SC, 0.5km)
Rear view
Ethernet Media Converter: TP-LINK MC200CM (multimode, 1000Mb/s, SC, 0.5km)
The included AC/DC adapter
Ethernet Media Converter: TP-LINK MC200CM (multimode, 1000Mb/s, SC, 0.5km)
View of the packaging
Distinguishing features:
  • 1 x Ethernet port 10/100/1000 Mbps (RJ-45)
  • maximum transmission distance - 0.5 km
  • auto MDI/MDI-X (TX port)
  • transmission via two multimode fibers
  • LED indicators showing operating status
  • easy installation (plug and play)
  • power supply included
Media converter TP-LINK M200CM is a reliable device allowing to transmit Gigabit Ehernet signals through two multimode optical fibers over distances up to 0.5 km. It is equipped with two SC connectors, one for transmitting the signal (TX), second for receiving it (RX). The optical signals are transmitted and received in the first transmission window (850 nm).
TP-LINK devices have MDI/MDIX auto detection feature and automatically find and set the fastest connection speed and mode. "Store and forward" mechanism allows to verify the received data using checksum function.
TP-LINK media converters are fully compatible with IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z standards. Their installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status.
Specifications:
NameEthernet media converter TP-LINK MC200CM
CodeL10224
Standards
IEE 802.3ab, IEEE 802.3z, IEE 802.3x
Transmission modeFull Duplex Flow Control
Interfaces1x1000BASE-T UTP 5, 5e (max. 100 m)
EIA/TIA-568 100Ω (max. 100 m)
1x1000BASE-FXMultimode
LED indicatorsPWR, LINK, RX
Certificates
FCC, CE
Transmission window [nm]850
Range [km]0.5 (50/125 um)
0.22 (62.5/125 um)
Power230 VAC / 9 VDC 0.6A
Dimensions [mm]94.5x73x27
Operating temperature [º]0-40

 

NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
Why to choose fiber optics:
  • possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200 km - without regeneration)
  • high-volume information transfer via single fiber
  • resistance to electromagnetic interference
  • resistance to weather conditions (humidity, electrostatic discharges and others)
  • no tapping possibility
  • low weight and small dimensions
TP-LINK media converters are widely used for the transmission of Ethernet signals over long distances and in areas exposed to harsh weather conditions. Optical fibers provide full electrical insulation and resistance to electromagnetic interference. TP-LINK Ethernet media converters are primarily used to connect building LANs (e.g. of scattered buildings of one corporation). Below there is a sample application of that converters.
Ethernet Media Converter ULTIMODE M-023M (two multimode fibers up to 2 km)
Example application of TP-LINK media converter
Cena bez DPHCena s DPHSlevaplatnost  
1304,27 Kč1578,17 Kč0 %
 
Ethernet Media Converter: TP-LINK MC200CM (multimode, 1000Mb/s, SC, 0.5km)
Kód zboží: L10224