MŮJ KOŠÍK
Můj košík je prázdný
Média konvertory
ULTIMODE
Ethernetový média konvertor ULTIMODE M-407M
(jeden single-módový kabel do 40 km)
Kód zboží: L11541
 
Cena s DPH
Sleva
Množství
2508,76 Kč
0 %
Ethernetový média konvertor ULTIMODE M-407M umožňuje změnu elektrických signálů (Ethernetového datového toku) přijímaného klasickým STP/UTP kabelem do modulovaného světelného signálu přenášeného jednomódovým optickým kabelem.
Ethernet Media Converter ULTIMODE M-407M<br />(one single-mode fiber up to 40 km)
ULTIMODE M-407M konvertory - set
Ethernet Media Converter ULTIMODE M-407M<br />(one single-mode fiber up to 40 km)
Přední panely
Ethernet Media Converter ULTIMODE M-407M<br />(one single-mode fiber up to 40 km)
Zadní panely
Popis vlastností:
  • 1 x Ethernetový port 10/100 Mbps (RJ-45)
  • maximální přenosová vzdálenost 40 km
  • přenos jedním single-módovým vláknem (WDM)
  • LED indikátory zobrazující operační status
  • jednoduchá instalace (funkční po zapojení)
  • set se skládá ze dvou transceiverů a 2 zdrojů napájení
ULTIMODE M-407M je spolehlivý set média konvertorů, který umožńuje přenos Fast Ethernetových datových toků dvěma single-módovými vlákny na vzdálenost až 40 km. Média konvertor má jeden SC konektor používaný k přenosu (Tx) nebo příjmu (Rx)signálu. To je možné díky použití technologie WDM (wavelength-division multiplexing) - různé vlnové délky (barvy) laserového světla k přenosu různých signálů jedním vláknem. To významně snižuje instalační náklady. L11541 set obsahuje dva transceivery a dva zdroje napájení (12VDC/2A).
Jedno zařízení přenáší optický signál v III přenosovém okně (1550 nm), whereas the second uses the II window (1310 nm). Sensitivity of the receiver and output power of the transmitter is adapted to transmit information up to 20 km. In the case of shorter distances (up to 2 km), it is required to use additional 2dB attenuators by the receivers. They will protect them against "burning".
ULTIMODE devices have MDI/MDIX auto detection feature and automatically find and set the fastest connection speed and mode. "Store and forward" mechanism allows to verify the received data using checksum function.
ULTIMODE media converters are fully compatible with IEEE 802.3 and IEEE 802.3u standards. Their installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status. Durable laser diode with Fabry-Perot resonator ensures the mean-time-between-failure (MTBF) at least of 100.000 hours (more than 11 years).
Specifications:

 Name:  ULTIMODE M-407M
 Code:  L11541
 Standards:  IEEE 802.3u, IEEE 802.3u
 LAN port:  802.3 (10Base-TX), 802.3u (100Base-TX/FX)
 RJ-45 UTP/STP cat. 3, 4, 5, max 100m
 Optical port: Single-mode fiber (8.3/125μm, 8.7/125μm, 9/125μm, 10/125μm)
 Max 40 km
 Wavelength (Tx):  1310/1550 nm
 Wavelength (Rx):  1310/1550 nm
 Optical connectors:  1xSC
 Tx power:  0 ... -5 dB
 Rx sensitivity:  -24 ... - 2 dB
 Transmission speed:  10/100 Mbps
 Power:  DC 5V/ 2A
 Operating temperature range:  -10 ... 50 oC

NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
Why to choose fiber optics:
  • possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200km - without regeneration)
  • high-volume information transfer via single fiber
  • resistance to electromagnetic interference
  • resistance to weather conditions (humidity, electrostatic discharges and others)
  • no tapping possibility
  • low weight and small dimensions
ULTIMODE media converters are widely used for the transmission of Ethernet signals over long distances and in areas exposed to harsh weather conditions. Optical fibers provide full electrical insulation and resistance to electromagnetic interference. Media converters are primarily used to connect building LANs (e.g. of scattered buildings of one corporation). Below there is a sample application of ULTIMODE converters.
Switch TP-Link TL-SF1008D (8 ports)Ethernet Media Converter ULTIMODE M-407M<br />(one single-mode fiber up to 40 km)
Example application of ULTIMODE media converter
The devices are designed for indoor operation. The ULTIMODE series includes a number of types:
  • with two multimode fibers - transmission up to 2km - M-023M L10021
  • with two single-mode fibers - transmission up to 40km - M-403M L11041
  • with one single-mode (WDM) fiber - transmission up to 20km - M-207G L11525 and M-207M L11521
List of parameters of ULTIMODE media converter series

Name: M-023M M-403M M-207M M-407M M-207G
Code: L10021 L11041 L11521 L11541 L11525
Supported standards: IEEE 802.3, IEEE 802.3u
Transmission speed: 10/100 Mbps 10/100/1000 Mbps
Optical connectors: 2xSC SC
Range [km]: 2 40 20 40 20
Wavelength Tx/Rx [nm]: 1310/1310 1310/1550, 1550/1310
Ethernet port: RJ-45
Power DC 5V/2A DC 5V/2A DC 5V/2A DC 5V/2A DC 5V/2A

Cena s DPH
Sleva
Množství
2508,76 Kč
0 %