Pohled na držák

The mobility range

Držák DL104 E9645 byl navržen tak, aby jste mohly moderní LCD monitory / televize připevnit na zeď. Jeho maximální kapacita je 15 kg, takže je vhodný pro lehké modely. Držák umožňuje snadné přizpůsobení náklonu (bez dalších nástrojů) v rozmezí 15 stupňů. Rovněž poskytuje až do 180 stupňů otočení pro optimální polohy obrazovky.

Držák je určen k montáži na stěny struktury, která poskytuje dostatečnou sílu.

The mount cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.
The basic required tools (not included): 3/16" drill bit, 1/2" masonry bit for brick / concrete block installations, electric drill, wrench or socket set, Phillips screwdriver.

Safety warning.

The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer. Improper installation may cause damage or serious injury.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.

Some operations should be performed by two skilled people!

Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.

Name	LCD wall arm: DL104 (tilt & swivel)
Code	E9645
Screen size range	13” – 30”
Distance from wall	81 - 390 mm
FDMI / MIS	VESA 75,100
Load capacity	15 kg
Tilt adjustment	15°
Rotation angle	180°
Dimensions	116x152x81-390 mm
Weight	1 kg