MŮJ KOŠÍK
Můj košík je prázdný

Mobilní

Repeatery GSM/3G

Nové mobilní zesilovače/repeatery vyhovující nejnovějším standardům a zákonným požadavkům
Original Polish version by Lukasz Kopciuch
GSM repeaters
GSM repeater Signal GSM-305 A6765
GSM repeater Signal GSM-505 A6775
GSM repeater Signal GSM-1205 A6785
NameRepeater SIGNAL GSM-305Repeater SIGNAL GSM-505Repeater SIGNAL GSM-1205
CodeA6765A6775A6785
Operating bands [MHz]880-915
925-960
GSM+EGSM
880-915
925-960
GSM+EGSM
880-915
925-960
GSM+EGSM
Output power [dBm]101520
Gain [dB] UP/DL60/6065/6570/70
Max group delay [ μs]0.50.50.5
Input attenuation (adj. manually) [dB]0-31 (step 1)0-31 (step 1)0-31 (step 1)
AGC range [dB]up to 20up to 20up to 20
Indoor coverage area [m2]3005001200
Impedance [Ω]505050
Certificates
CE
(ETSI 300 609 -4), RoHS
CE
(ETSI 300 609 -4), RoHS
CE
(ETSI 300 609 -4), RoHS
Dimensions [mm]218x155x65218x155x65218x155x65
Antenna connectors (for outdoor/indoor antenna)
N-f/N-fN-f/N-fN-f/N-f

 

The new GSM amplifiers/repeaters from Signal series can be used
in all GSM networks
  • Extended operating band
    The appearance of additional frequency ranges (880-890 MHz, 925-935 MHz), extending the existing GSM900 band (890-915 MHz, 935-960 MHz) aims to increase competition in the market by assigning "new" frequencies to new mobile operators. The new band is called EGSM - Extended GSM.
    The lack of the new GSM band (880-890 MHz, 925-935 MHz) in GSM repeaters/amplifiers would eliminate the possibility of using cellular phones of the new operators (in the areas/buildings/rooms that do not guarantee proper connectivity without such boosters).
    Some cellular networks using EGSM band:
    • Poland:
      • Play
      • Aero2
    • Austria
      • One GmbH
    • Belgium
      • Base
    • Bulgaria
      • BTC Mobile EOOD
    • Czech republik
      • Telefónica O2
    • Denmark
      • Telia Nättjänster Norden AB
    • Estonia
      • EMT AS
      • Elisa Mobiilsideteen-used AS
      • Tele2 Eesiti AS
    • Holland
      • Orange
      • Telfort
    • Finland
      • Radiolinja Origo Oy
      • Sonera Mobile Networks Oy
      • DNA verkot Oy
    • France
      • Bouygues Telecom
    • Deutchland
      • E-PlusMobilfunk GmbH &Co KG
      • O2 (Germany) GmbH &Co OHG
    • Italy
      • TIM
    • Liechtenstein
      • Orange
    • Lithuania
      • Omnitel
      • Bite Litetuva
      • Tele2
    • Luxembourg
      • VoxMobile SA
    • Moldova
      • Eventis Mobile SA
    • Romania
      • Cosmote RMT
    • Slovakia
    • Telefonica O2
  • Spain
    • Telefonica Moviles
    • Orange
  • Swiss
    • TDC
    • Orange
  • Great Britain
    • 02
    • Vodafone
    To avoid such problems, DIPOL has introduced new GSM amplifiers that amplify the whole GSM and EGSM (880-915 MHz, 925-960 MHz) bands.
    GSM band consists of 124 channels, each 200 kHz wide. The channels are numbered from 1 to 124. The center frequency fn of n channel is determined by the formulas: for "upper" channels" fn= (890 + n*0.2) MHz, for "lower" channels fn=(935 + n*0.2) MHz.
1234567891011121314151617181920
2122232425262728293031323334353637383940
4142434445464748495051525354555657585960
6162636465666768697071727374757677787980
81828384858687888990919293949596979899100
101102103104105106107108109110111112113114115116117118119120
121122123124 
GSM channels
    EGSM, which uses 880-890 MHz and 925-935 MHz frequency ranges, includes additional 50 channels. They are numbered from 975 to 1023 according to the formula fn=[890+(n-1024)*0.2] MHz and fn=[935+(n-1024)*0.2] MHz, where fn is the center frequency of channel n (each 0.2 MHz wide).
975976977978979980981982983984985986987988989990991992993994
995996997998999100010011002100310041005100610071008100910101011101210131014
10151016101710181019102010211022102310241025102610271028102910301031103210331034
EGSM channels
  • Compliance with ETSI 300 609-4
    Recently, European countries have tightened the regulations applicable to some wireless telecommunications equipment. Currently, in order to distribute GSM repeaters in EU countries as lawful merchandise, the manufacturer or distributor has to put them through testing procedures in appropriate laboratory, to confirm compliance with the following standards:
  • ETSI EN 300 609-4 V8.0.2 (The most important) Digital cellular telecommunications system (Phase 2 and Phase 2+); Base Station System (BSS) equipment specification; Part 4: Repeaters (GSM 11.26 version 8.0.2 Release 1999).
  • EN 60950-1:2004-. Security.
  • ETSI EN 301 489-1 V1.6.1 Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements.
  • ETSI EN 301 489-8 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations.
  • ETSI EN 301 502 V8.1.2 Harmonized EN for Global System for Mobile communications (GSM); Base Station and Repeater equipment covering essential requirements under article 3.2 of the R&TTE directive (GSM 13.21 version 8.1.2 Release 1999).
    The certification evidence of compliance with European Union regulations issued by the laboratory has to encompass all the above mentioned standards. The same applies to CE declaration of conformity issued by the manufacturer or importer. There are also declarations of conformity with the harmonized standards of R&TTE Directive, but the distributor must be sure that the standards are contained in this directive.
    The evidence of compliance with all required standards issued by European laboratory - NATIONAL INSTITUTE OF TELECOMMUNICATIONS in Warsaw, Poland can be seen below:
The evidence of compliance with all required standards issued by the National Institute of Telecommunications in Warsaw, Poland
EC Declaration of Conformity issued by DIPOL
  • Adjustable input attenuation
    A serious problem during the installation of a GSM repeater is to ensure adequate signal level at the input of the amplifier. In the case of too weak or too strong signal, the system will not function properly (broken calls, problems to establish connections etc.).
    A convenient solution to this problem provides the built-in attenuator allowing to adjust the level of the input signal (attenuation 0-31 dB, step 1 dB). The approximate signal level is indicated by LEDs located on the front panel of the repeater.
  • Automatic Gain Control (AGC)
    As mentioned above, the input signal level is essential for stable operation of GSM repeaters. Of course, it can be adjusted manually when installing the system, but later, when a cellular operator increases output power of its base station, changes the transceiver or antenna, deploys a new base station etc, it would require another visit of the installer.
    To avoid this problem, the Signal repeaters distributed by DIPOL have been equipped with automatic gain control, which keeps the output signal level stable irrespective of the input changes within 20 dBm range.
All these features make the GSM repeaters a new category of products which meets all requirements in terms of functionality, and, what is even more important, in terms of European law (compliance with ETSI 300 609-4).