MŮJ KOŠÍK
Můj košík je prázdný

TV, TV-SAT

Schémata

Pass-through multiswitch system in apartment building
(for two satellites)
APPLICATION OF 9-INPUT MULTISWITCHES

Here's an example of installation diagram in apartment building. The system provides each outlet with all available terrestrial broadcasts and satellite programs from one of two satellites (in the example - Astra and HotBird). The antennas and triplexer are mounted on the roof, the set of channel amplifiers and splitters - in the attic. The system is expandable and allows to implement new functions in the future, e.g. CCTV monitoring, similarly to this diagram. During construction or renovation of the building it is very important to run the appropriate cables to all points where one may need antenna outlets. It is worth to use quality satellite coax, in order not having to exchange the cable after a couple of years. The system has to be designed and installed by professional installation company.
Pass-through systems based on radial multiswitches with passive terrestrial paths are less flexible than tap networks, so they are dedicated for networks with dozen or so outlets. However, the undoubted advantage of this type of installations is the ease of their construction (self-contained riser/s).
Satelitní parobola 110cm FAMAVAL 110 LHDržák konvertoru LNB - dvojitýKoaxiální kabel 75Ohm TRISET-113 1,13/4,8/6,8 [1m]Multipřepínač MS-951 TERRA, 9 vstupů/4 výstupyTV/R/SAT zásuvka koncováTV/R/SAT zásuvka koncováTV/R/SAT zásuvka koncováTV/R/SAT zásuvka koncováTV/R/SAT zásuvka koncováMultipřepínač MS-951 TERRA, 9 vstupů/4 výstupyMultipřepínač MS-951 TERRA, 9 vstupů/4 výstupyMultipřepínač MS-951 TERRA, 9 vstupů/4 výstupyDipol 19/21-60 DIGITAL - 19-element UHF TV AnténaAnténní slučovač ZA-104Ms (FM/6-12/21-69/75)TV/R/SAT zásuvka koncováTV/R/SAT zásuvka koncováTV/R/SAT zásuvka koncováTV/R/SAT zásuvka koncováTV/R/SAT zásuvka koncováZesilovač s 9-ti vstupy pro multiswitche: TERRA SA-901Multipřepínač MS-952 TERRA, 9 vstupů/4 výstupyAnodiovaná FM Anténa Dipol 1RUZ PM A (všesměrovál H+V)Anténa rádiová DIPOL-4/DABLNB konvertor QUATRO INVERTO 0.4dB

SatNet program allows to design a practical implementation of the system.
To select the right components, the data for the design must contain:
  • network topology,
  • levels of satellite signals,
  • levels of terrestrial signals,
  • attenuation of the cable/s.
Each element of the installation has its control points (connections with the rest of the network, including the cable runs). Clicking on them, the user of the program can see detailed characteristics (signal levels for different frequencies). If the signals meet the adopted criteria, they are colored in green, if some levels are too low - in blue, if too high - in red. In the diagram below all the points are in green - the project is consistent with the assumptions.
Screenshot from SatNet utility
The design made with the SatNet program can be saved to a file. The file saved for the case shown above can be downloaded here. So anyone can install the SatNet program and load this file to test the utility and modify on their own (e.g. extend) the original example.