MŮJ KOŠÍK
Můj košík je prázdný

TV, TV-SAT

Schémata

Reception of digital satellite platform throughout the house using only one smart card
Example of practical application allowing to receive:
  • terrestrial TV channels,
  • receive FM radio programs,
  • receive satellite broadcasts from two satellites,
    • receive FTA channels,
    • receive pay TV channels (one of SECA MediaGuard digital platform) - on four sat receivers, with the use of one subscription card,
  • watch the image from a CCTV camera on any TV set.
Two Quatro LNBs (A98257) connect with R70808 multiswitch (via eight coaxial cables TRISET-113 E1015). In the diagram below, the inputs of the multiswitch connected with the second LNB (for a second satellite) are not visible (they are physically placed in the second row, behind the first). Possible application of two-tuner PVR receivers requires to install two TRISET-113 E1015 cables from the multiswitch to the R694140 outlets. This will enable simultaneous viewing of one program and recording of another. The example installation distributes signals for three "single" receivers and one two-tuner receiver.
To receive channels of a SECA MediaGuard digital platform on several TVs (up to 8), the subscribers of Cyfra+ (Poland), Digital+/Astra (Spain), Canal Digitaal (Holland), CanalSat (France), Meo (Portugal) can use single smart card (and subscription) but as many suitable sat receivers as the number of TVs, each equipped with Wireless Client Card for Clone+ (A9911). The original smart card is not put to any receiver, but to the central unit - Clone+ Wireless Smart Card Splitter (A9910) - which wirelessly transfers subscription rights to the Clone+ client cards.
The antenna system is additionally used for distribution of the image from a CCTV camera (at gate, entrance etc.). The image from the camera can be watched on any TV set.
The cables used:
  • Triset-113 E1015 - TV/satellite cable for indoor applications,
  • Triset-113 PE E1017 - TV/satellite cable for outdoor applications,
  • CAMSET solo M6000 - coaxial cable between the CCTV camera and RF modulator.
The terrestrial antennas should be chosen according to local reception conditions.
Selection of Terrestrial TV Antennas
Aluminum Offset Satellite Dish: 90cm (A - E adjustment)Universal QUATRO LNB: Inverto Red Extended 0.3dBCompression F Connector: PCT TRS-9 NT<br />(for TRISET-113) Double Mount (for 2 LNBs)9/8 Multiswitch: Terra MSR-908 (active terrestrial path)Subscriber Terminal Outlet:Signal RTV-SAT-R (return path)Additional Wireless Client Card for Clone+Additional Wireless Client Card for Clone+Additional Wireless Client Card for Clone+Additional Wireless Client Card for Clone+Wireless Smart Card Splitter: Clone+ (Mediaguard)FM Antenna: Dipol 1RUZ PM B (omnidirectional H+V)VHF TV Antenna: DIPOL 7/6-12 (7-element)UHF TV Antenna: DIPOL 44/21-69 Tri DigitalAntenna Triplexer - ZA 4MProfessional Compression BNC Connector PCT<br />(for CAMSET cables)Outdoor Color CCTV Camera: n-cam 210 + IRCompression Antenna Socket PCT-IECF-9<br />(for TRISET-113)2-Way TV/FM Splitter R-2 SignalTV Modulator: Signal Digital Classic (ch.21-69, K - 6.5 MHz)
On every TV set connected to the individual receiver, one can choose and watch any of terrestrial TV or satellite programs from the pay-TV platform, and additionally - the image from the analog CCTV camera.