Rekordér HD-TVI TURBO HD 3.0: Hikvision DS-7216HUHI-F2 / S (16kanálov, 5MPix při 10s / s, H.264, HDMI, VGA

Kód zboží: M75516
Produkt již není k dispozici
Nabídka: Knihovna:

Podrobný popis

1 Mpix HD-TVI TURBO HD kompaktní kamera Hikvision DS-2CE16C0T-IR (720p, 2.8 mm, 0.1 lx, IR do 20m)
1 Mpix HD-TVI TURBO HD kompaktní kamera Hikvision DS-2CE16C0T-IR (720p, 2.8 mm, 0.1 lx, IR do 20m)
1 Mpix HD-TVI TURBO HD kompaktní kamera Hikvision DS-2CE16C0T-IR (720p, 2.8 mm, 0.1 lx, IR do 20m)
1 Mpix HD-TVI TURBO HD kompaktní kamera Hikvision DS-2CE16C0T-IR (720p, 2.8 mm, 0.1 lx, IR do 20m)
Key features:
  • 5 MPix rozlišení při 10 s / s, 3 MPix při 15 s / s, 1080p (2 MPix) a nižší rozlišení při 25 s / s
  • Podpora pro 16 HD-TVI, AHD nebo CVBS kamer a dvě IP kamery (Hikvision nebo jiné od ONVIF, maximálně 4 MPix)
  • Komprese videa H264 +
  • Podpora pro IE, Google Chrome, Opera, Safari
  • Kanál 0 - možnost sledovat všechny kamery s minimálním požadavkem na šířku pásma sítě
  • Paralelní provoz výstupů HDMI (4K, 30 Hz) a VGA (2K, 60 Hz)
  • výstup CVBS
  • Vyhledávání záznamů podle alarmových událostí
  • Funkce analýzy obrazu VCA
  • Digitální přiblížení během živého monitorování a přehrávání
  • Synchronní přehrávání ze 16 kanálů
  • Podpora pro IPv4, IPv6,
  • Monitorování stavu LAN, kamery, pevné disky
Hikvision DS-7216HUHI-F2 / S je 16-kanálový CCTV rekordér schopen zaznamenávat sledovací video poskytované ve standardech HD-TVI, AHD, CVBS a IP. Maximální rozlišení nahrávání je 5 MPix při 10 s / s (podporuje také 3 MPix při 15 s / s). V případě rozlišení 1080p / 960x1080 / 720p / VGA / WD1 / 4CIF / CIF je maximální snímková frekvence 25 s / s
The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed with the use of H.264 or H.264+ method. The H.264+ video compression method has been specially developed for video surveillance systems. This method is especially efficient in the case of static scenes, preserving image quality similar to H.264 but generating considerably smaller data stream, which saves disc space.
The recording can be performed in different modes: continuous, motion detection (with pre- and post-event recording), alarm (with pre- and post-event recording), or continuous recording with special parameters in the case of specific events. Each channel can be configured individually in this aspect. It is possible to increase the frame and bit rates, independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering etc), the NVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second of the period with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less space on the storage media.
Each channel has the possibility of independent settings for intelligent image analysis. The image analysis includes detection of virtual boundary line trespass (including direction), and detection of intrusion to an area of a square shape. The image quality diagnostic function can e.g. send email or alarm message on a worsened focus, excessive brightness or discoloration.
The iVMS 4200 client software enables users of HIKVISION devices to manage them in IP networks. The software allows for configuration and management of NVRs/DVRs, IP and analog cameras (in hybrid systems). The iVMS 4200 utility can remotely manage up to 256 devices, with the use of up to 4 monitors. Oner monitor can display up images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifying, two-way audio transmission, creating multi-level e-maps.
iVMS-4500 is a mobile application for smartphones running Android, iOS or Windows Phone operating systems. It can be used for live monitoring and playback of images from DVRs, NVRs, IP cameras via Wi-Fi, 2G or 3G networks.
Ezviz (EasyVision) is a free service which can be activated in Hikvision NVRs and IP cameras. This free service allows less advanced users to easily access to the video from the cameras via the Internet, without forwarding router ports. To enable remote access, the user should only connect the device to the network (which requires a valid IP address and appropriate gateway settings). The next step is the creation of user account at the www.ezviz7.com website. The account can accommodate devices in a local area network (with activated Ezviz service). The devices will be available from anywhere via the Internet.
SADP (Search Active Device Protocol) is a free and simple to use utility for searching Hikvision IP cameras and Hikvision DVRs/NVRs in the local network. The network device search tool can also be used for modification of network parameters of the Hikvision devices, including the change of passwords or recovery of default passwords. Detailed information on the software and its use is contained in the SADP application - LAN tool for organizing CCTV systems based on Hikvision devices article.

Specifications:
Name/modelDS-7216HUHI-F2/S
CodeM75516
Video formats
HD-TVI, AHD, CVBS, IP
Video inputs
BNC x 16 + 2x IP channel
Video outputs
HDMI, VGA, CVBS
HDMI/VGA resolutions

4K: 3840×2160, 30 Hz (only via HDMI)
2K: 2560×1440, 60 Hz
1080p: 1920x1080
SXGA: 1280x1024
720p: 1280x720
XGA 1024x768

Audio input / output connectorsRCA 4 / 1
Alarm inputs / outputs
16 / 4
Alarms and exceptionsMotion detection, video loss, camera tampering
Live monitoring
25 fps
Recording options5 MP
10 fps
3 MP
15 fps
1080p25 fps
720p25 fps
VGA25 fps
WD1/4CIF25 fps
Video bit rate range (single channel)32 kbps - 10 Mbps
Audio bit rate64 kbps
HDD capacity & interface2x max 6 TB SATA HDD
S.M.A.R.T. monitoring toolsYES
NAS/SAN compatibility
YES (NAS)
External ports
1x USB 3.0, 1x USB 2.0; RS-485; RJ-45 (10/100/1000 Mbps)
Secondary stream
WD1, 4CIF, CIF, QVGA, QCIF
Network protocols
TCP/IP; DHCP; DDNS; PPPoE; email; NTP; SNMP; UPnP
Software ports
Server - 8000
HTTP - 80
RTSP - 554
Remote monitoring
Internet Explorer; after installing plugins - Google Chrome, Firefox, Safari;  smartphones (Android, Windows Mobile)
PTZ protocols
Yes
ArchivingUSB storage device, remote server
Power input
12 VDC / 5 A (dedicated PSU)
Power consumption
<25 W (without HDD)
Operating temperature-10°C...55°C
Operating humidity
10%...90%
Dimensions ( W x D x H )380 x 320 x 48 mm