MŮJ KOŠÍK
Můj košík je prázdný

Zboží stažené z prodeje

Twisted Pair Cable Video Transmitter TRN-1/400
Kód zboží: M1668
Zboží je stáhnuto z nabídky
UTP Video Transmitter: TRN-1/400
View of the device

UTP Video Transmitter: TRN-1/400
Front view

The TRN-1/400 transmitter allows to power a camera with thermostat and transmit video signal from the camera by twisted pair cable (UTP, STP, FTP). Video signal from the camera is put to the TRN-1/400 transmitter input, and transmitted by twisted pair cable to the TRO-4/400 M1670 receiver or the TRO-1/400 M1669 receiver. Both he transmitter unit and the receiver unit adapt 75 ohm coaxial cable impedance to twisted pair cable impedance. It guarantees video signal transmission up to 400 meters. The TRO-1/400 M1669 receiver supplies un-stabilized voltage (max. 40V DC) to twisted pair cable, and the TRN-1/400 transmitter converts it into 12V DC stabilized voltage. It allows to power the camera and the thermostat.
LOADMAXIMUM DISTANCE
AT -24V AC
MAXIMUM DISTANCE
AT -29V
1 camera 250mA1080 meters1600 meters
1 camera 250mA
+ thermostat 500mA
260 meters500 meters
ATTENTION! The TRN-1/400 transmitter is not a separate device. It works only with the TRO-1/400 receiver or the TRO-4/400 receiver. Assuming that the power consumption of the camera is 250mA, and 500mA for the thermostat (TT-12E) , the voltage can be sent over the following distances:


LoadMAX Distance
Voltage -24V
MAX Distance
Voltage -29V
1 camera 250mA1080 m1600 m
1 camera 250mA
+ thermostat 500mA
260 m500 m
Wiring diagram for 4 cameras without thermostats
Wiring diagram for one camera without a thermostat
Wiring diagram for one camera with a thermostat
In all the applications the RJ-45 plug is to be connected in accordance with T568B standard.
Zboží je stáhnuto z nabídky
 
Twisted Pair Cable Video Transmitter TRN-1/400
Kód zboží: M1668