MŮJ KOŠÍK
Můj košík je prázdný

Kabely

UTP/FTP-vnitřní

UTP kabel NETSET BOX U/UTP 5e vnitřní [305m]
Kód zboží: E1408_305
Cena bez DPHCena s DPHSlevaplatnost  
2100,80 Kč2541,97 Kč0 %
The NETSET BOX U/UTP 5e cable far exceeds the requirements for Category 5e twisted pair cables.
Cat 5 UTP Cable: NETSET UTP 5e<br /> (indoor) [1m]
Cat 5 UTP Cable: NETSET UTP 5e<br /> (indoor) [1m]
The NETSET BOX U/UTP CAT 5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
The NETSET cable comes from the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.0 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
Main features of NETSET U/UTP cat 5e cable E1408:
  • highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
  • parameters far exceeding the requirements for Category 5+ twisted pair cables
  • preliminary quality control of materials and thorough tests of the final product,
  • meter markers, deviation less than 0.5%,
  • solid wires of 0.50 mm diameter (24 AWG),
  • wire insulation made of homogeneous, colored PE; outer diameter: 0.88 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
  • insulated wires twisted in pairs of 1.8 mm diameter,
  • pairs twisted together, outer diameter of ca. 4.0 mm,
  • sheath made of gray PVC (RAL 7032), of 5.0 mm diameter.
The NETSET U/UTP cat 5e E1408 LAN cable is manufactured in compliance with:
IEC 61156-6 (2000), ISO/IEC 11801 (2000), ANSI/TIA/EIA-568-A (1995), EN 50173 (1999), yd/t1019-2001 standards.
The cable comes with a 15-year warranty.
The manufacturer guarantees stability of cable parameters at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions.
The NETSET UTP cat 5e E1408 cable can be used in a wide temperature range: -20oC...+70oC, and installed between 0oC and +50oC. The minimum bending radius factor (radius to diameter ratio) is 8.
Specifications
NameNETSET U/UTP 5e
CodeE1408
Structure
Wires

solid copper conductors

Ø 0.50 mm (24 AWG)

Wire insulationPE
SheathPVC (gray, RAL 7032)
Outer diameter [mm]5.0 ±0.3
Copper content [kg/km]14.9
Weight [kg/km]28.5
Electrical parameters
Wave impedance [Ω]

100 ±15

Capacitance of any transmission path at 1kHz [nF/km]

50 ±1

Nominal Velocity of Propagation (NVP) [%]67
Resistance of any transmission path [Ω/km]≤ 188
Asymmetry in capacitance of transmission paths to the ground [pF/km]≤ 1600
Insulation resistance [MΩ/km]> 500
Installation and operation
Operating temperature range [oC]-20...+70
Operating humidity range [%]0...100
Installation temperature range [oC]0...+50
Minimum bending radius [radius to diameter ratio]>8
NETSET BOX U/UTP CAT 5e cable has been tested by

Telecommunications Equipment Testing Laboratory
of the
National Institute of Telecommunications in Warsaw, Poland

and got
TECHNICAL OPINION OF THE INSTITUTE

The technical opinion of the National Institute of Telecommunications for the NETSET UTP CAT5e cable is available here.
The results of the measurements of the U/UTP kat. 5e cable conducted by the
National Institute of Telecommunications in Warsaw, Poland
  • Pair resistance and resistance asymmetry testing.
CablePairWireWire resistance [Ω/km]Resistance asymmetry [%]
UTP cat. 5e1a92,7260,35
b93,054
2a94,6620,34
b94,982
3a96,2280,55
b96,755
4a96,1070,39
b95,733
Required--<150≤3,0
  • Effective capacitance and capacitance asymmetry testing.
CablePairEffective capacitance [nF/km]Capacitance asymmetry [pF/km]
UTP cat. 5e147,3577
244,87132
345,7136
446,705
Required--≤1600
  • Insulation testing.
CablePairWireInsulation resistance [MΩ/km]
UTP cat. 5e1a8,8·104
b1,2·105
2a9,0·104
b1,6·105
3a8,1·104
b2,0·105
4a7,5·104
b1,1·105
Required--≥50
  • Tests of electric strength of insulation.
Test methodTest voltage VAC
Applied (passed)Required
Voltage applied between connected in parallel all a wires and all b wires10001000
  • End-to-end attenuation testing.
CablePairEffective attenuation [dB]
UTP cat. 5e122,9
222,8
321,5
421,2
Required-≤24,9
  • Near End Cross Talk (NEXT) testing.

 

CablePair to pairNEXT [dB]
UTP cat. 5e1 - 243,5
1 - 347,9
1 - 445,3
2 - 344,9
2 - 447,8
3 - 441,4
Required-≥34,0
  • Return loss testing.
CablePairReturn loss [dB]
UTP cat. 5e120,8
221,2
320,9
419,9
Required-≥19,4
  • Total Near End Cross Talk (PS-NEXT) testing.
CablePairPS-NEXT [dB]
UTP cat. 5e136,94
233,93
333,63
435,44
Required-≥31,0
Transmission parameters
The parameters show that NETSET U/UTP 5e E1408 fulfills all requirements for Category 5e cables, with a large safety margin.

Cena bez DPHCena s DPHSlevaplatnost  
2100,80 Kč2541,97 Kč0 %
 
UTP kabel NETSET BOX U/UTP 5e vnitřní [305m]
Kód zboží: E1408_305
DOPLNIT
KNIHOVNA POBOČKY
NOVINKY V KNIHOVNĚ
PŘEČTĚTE SI