Instalační součásti
Transformátory
Video Transformer-Receiver TRO-1/400
Kód zboží: M1669
Cena s DPH
Sleva
Množství
355,03 Kč
0 %
The TRO-1/400 transformer and receiver is designed for delivering DC power and receiving video signal from single TRN-1/400 M1668 video transformer-transmitter over a twisted pair cable (UTP, STP, FTP). The receiver is powered by 24V or 29V AC from external AC power source. Video signal from a camera is sent to the TRN-1/400 M1668 transmitter's input, and transmitted via twisted pair cable to the TRO-1/400 receiver. The transmitter and receiver units adapt 75 ohm coaxial cable impedance to twisted pair impedance. It guarantees video signal transmission for up to 400 meters. The TRO-1/400 receiver delivers unstable voltage (max. 40V DC) to twisted pair cable, and the TRN-1/400 M1668 transmitter converts it down to stable 12V DC which is then used to power the camera and thermostat. Assuming that camera's power consumption is 250mA and thermostat's (TT-12E) 500 mA, the power can be sent over the following distances:
| LOAD | MAXIMUM DISTANCE AT -24V AC | MAXIMUM DISTANCE AT -29V |
| 1 camera 250mA | 1080 meters | 1600 meters |
| 1 camera 250mA + thermostat 500mA | 260 meters | 500 meters |
For distances greater than 400 meters a signal amplifier should be used.
| Name | TRO-1/400 Twisted pair receiver |
| Code | M1669 |
| Video Bandwidth | to 50 MHz |
| Video Insertion Loss | 0.5 dB ( for f=5 MHz ) |
| Video Output Impedance | 75 ohm |
| Twisted Pair Impedance | 100 ohm |
| Coaxial Cable Output Type | BNC socket |
| Twisted Pair Cable Socket Type | RJ-45 (8 pin, 4 pairs) |
| Maximum Power Supply Input | AC 29V / 1A |
| Maximum Output Voltage | 40V DC |
| Maximum Output Current (40V) | 1A |
| Fuse 5x20 | 2A/250V |
| Weight | 100 g |
| Dimensions | 117x64x30 mm |

Schematic diagram for a camera without thermostat

Schematic diagram for a camera with thermostat

Schematic diagram for a camera without thermostat
Cena s DPH
Sleva
Množství
355,03 Kč
0 %
KNIHOVNA POBOČKY
NOVINKY V KNIHOVNĚ
PŘEČTĚTE SI
Translation of the domain name into the set of numbers is performed by the appropriate DNS server, to which the computer sends a query asking for the translation of the... Více »



