Pohled na zesilovač

Pohled shora

Pohled po odstranění krytu

The RF amplifier AWS-1036 has been designed for applications in individual and community antenna installations. The device has been equipped with one input (which may require to employ an antenna diplexer to combine the received channels), and four outputs with independent level controls. It is especially suitable for signal distribution in community (MATV) and CATV systems (due to whole TV band).
The independent level controls allow equalize signals in outlets (or branches) in the case of different distances (compensation of attenuation of the cables).

The set also includes regulated AC/DC adapter (output: 12V/250mA, Jack: 3.5 mm), but it is possible to power the amplifier through its "D" output, via coaxial cable, using RF/DC separator - AZS-03 C0397 (and the included power supply). It allows to mount the amplifier in the attic and power it from the place with access to the power line. When using a splitter, in this case it has to pass DC voltage, e.g. E2094.

AWS-103xzesilovače jsou vybavené pevnou litinovou krabičkou, které je chrání proti vnějšímu působení.
Zesilovače nejsou připravené pro provoz v otevřeném prostoru nebo ve vlhkých místech.

 

Název	Broadband amplifier AWS-1036
Kód	B11587
Počet vstupů a výstupů		1/4
Kmitočtový rozsah	MHz	47-862
Amplification (increasing with freq.)	dB	20/23 +/-2
Max. výstpní úroveň (dva TV kanály)	dB	100
IMA3 60 dB	dB	94
Noise figure	dB	5 +/-1
Return loss	dB	≥10
Amplif. adjustment range VHF/UHF	dB	0...14 +/-1
DC napájecí napětí	V	12 +/-5%
Odběr proudu	mA	165 +/-5%
Vstupní/výstupní impedance (F)	Ω	75
Provozní teplota	oC	-25...55