How to attach RJ-45 connector to cat 5 UTP cable. Male RJ-45 connector J2008 (8P8C category 5e for UTP/FTP cables with solid wires) used for computer network cables. NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs). Crimping Tool HT-210N J9210 for RJ-45 plugs. Cable Tester (RJ-45, RJ-11) N7055 helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.
16,26 Kč
Cena s DPH | Sleva | Množství | platnost |
---|---|---|---|
16,26 Kč | 0 % | od 1 ks. |
Dostupný
NETSET UTP PE 5e E1412 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground. However, in the case of cabling operating in environments with increased humidity, the better choice is the gel-filled cable - NETSET UTPw 5e E1410.
Podrobný popis
NETSET UTP PE 5e E1412 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground. However, in the case of cabling operating in environments with increased humidity, the better choice is the gel-filled cable - NETSET UTPw 5e E1410.
The latest high-performance IP CCTV cameras require appropriate quality of transmission medium. High resolutions of the cameras are connected with high bandwidth requirements (especially in the case of megapixel devices). A very important feature of a UTP cable becomes the crosstalk between pairs.
Due to market demand DIPOL has introduced a new family of high-quality twisted-pair cables named NETSET.
Due to market demand DIPOL has introduced a new family of high-quality twisted-pair cables named NETSET.
The outer diameter of the NETSET UTP PE 5e cable has been reduced to 6.0 mm, which considerably facilitates laying of the cable in ducts and pipes. The insulation of the wires has been made of special PE, to make it easier to crimp RJ-45 connectors onto the cable.
Distinguishing features of NETSET UTP PE 5e cable:
- highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
- parameters far exceeding the requirements for Category 5+ twisted pair cables, confirmed by the tests performed in Central Testing Laboratory of the National Institute of Telecommunications in Warsaw, Poland,
- preliminary quality control of materials and thorough tests of the final product,
- meter markers - length error less than 0.5%,
- solid wires of 0.50 mm diameter (24 AWG),
- wire insulation made of homogeneous, colored PE; outer diameter: 1.01 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
- insulated wires twisted in pairs of 2.02 mm diameter,
- pairs twisted together,
- sheath made of black PE, outer diameter of 6.0 mm.
NETSET UTP PE 5e E1412 cable is manufactured in compliance with EN 50173, ISO/IEC 61156-5 edition: 2002, ISO/IEC 11801 standards.
NETSET cables come with a 15-year warranty.
The manufacturer guarantees stability of the parameters given in the "Specifications" at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions (see the "Specifications" below).
NETSET UTP PE 5e E1412 cable can be used in a wide temperature range: -20o...+50oC, and installed between -30o...+50 oC.
The cable is also available in unreel box - E1412_305
Specifications
Name | NETSET UTP PE 5e |
Code | E1412_1 |
STRUCTURE | |
Wires | solid copper conductors Ø 0.50 mm (24 AWG) |
Wire insulation | PE |
Sheath | PE (black) |
Outer diameter [mm] | 6.0 |
Copper content [kg/km] | 14.2 |
Weight [kg/km] | 33 |
ELECTRICAL PARAMETERS | |
Wave impedance [Ω] | 100 ±15 |
Capacitance of any transmission path at 1kHz [nF/km] | ≤56 |
Nominal Velocity of Propagation (NVP) [%] | 67 |
Resistance of any transmission path [Ω/km] | ≤ 188 |
Asymmetry in capacitance of transmission paths to the ground [pF/km] | ≤ 1600 |
Insulation resistance [MΩ/km] | > 1000 |
INSTALLATION AND OPERATION | |
Operating temperature range [°C] | -20...+50 |
Operating humidity range [%] | 0...100 |
Installation temperature range [°C] | -30...+50 |
Minimum bending radius (indoors) [radius to diameter ratio] | >8 |
NETSET BOX UTP CAT 5e cable has been tested by
Central Chamber for Telecommunications Testing of
National Institute of Telecommunications in Warsaw, Poland
and got
CERTIFICATE OF THE INSTITUTE
The results of the measurements of the NETSET BOX UTP PE 5e cable conducted by the
National Institute of Telecommunications in Warsaw, Poland
The results of NETSET BOX UTP CAT 5e tests performed by
National Institute of Telecommunications in Warsaw
- Pair resistance testing.
Pair | Wire | Wire resistance [Ω/km] | Resistance asymmetry [%] | |
UTP cat. 5e PE | 1 | a | 87.320 | 0.22 |
b | 87.136 | |||
2 | a | 84.663 | 0.20 | |
b | 84.831 | |||
3 | a | 85.082 | 0.21 | |
b | 84.903 | |||
4 | a | 86.035 | 0.18 | |
b | 86.192 | |||
Required | - | - | ≤150 | ≤3.0 |
- Capacitance testing.
Pair | Effective capacitance [nF/km] | Capacitance asymmetry [pF/km] | |
UTP cat. 5e PE | 1 | 51.74 | 208 |
2 | 49.21 | 116 | |
3 | 49.79 | 7 | |
4 | 50.85 | 13 | |
Required | - | ≤55 | ≤1600 |
- Insulation testing.
Pair | Wire | Insulation resistance [MΩ/km] | |
UTP kat. 5e PE | 1 | a | 4.5 · 105 |
b | 4.8 · 105 | ||
2 | a | 6.6 · 105 | |
b | 4.6 · 105 | ||
3 | a | 4.9 · 105 | |
b | 5.8 · 105 | ||
4 | a | 4.5 · 105 | |
b | 7.0 · 104 | ||
Required | - | - | ≥150 |
- Tests of electric strength of insulation.
Test method | Test voltage [VAC] | |
Applied (passed) | Required | |
Voltage applied between connected in parallel all a wires and all b wires | 1000 | 1000 |
Pair | Effective attenuation [dB] | |
UTP cat. 5e PE | 1 | 21.2 |
2 | 20.8 | |
3 | 20.5 | |
4 | 21.2 | |
Required | - | ≤24.9 |
- Near End Cross Talk (NEXT) testing.
Pair to pair | NEXT [dB] | |
UTP cat. 5e PE | 1-2 | 47.3 |
1-3 | 52.6 | |
1-4 | 55.4 | |
2-3 | 54.8 | |
2-4 | 55.5 | |
3-4 | 60.2 | |
Required | - | ≥34.0 |
- Return loss testing.
Pair | Return loss [dB] | |
UTP cat. 5e PE | 1 | 20.7 |
2 | 21.8 | |
3 | 22.4 | |
4 | 21.5 | |
Required | - | ≥19.4 |
- Total Near End Cross Talk (PS-NEXT) testing.
Pair | PS-NEXT [dB] | |
UTP cat. 5e PE | 1 | 45.69 |
2 | 46.07 | |
3 | 50.11 | |
4 | 51.77 | |
Required | - | ≥31.0 |
The parameters show that NETSET BOX UTP PE 5e fulfills all requirements for Category 5e cables, with a large safety margin.
Price for 1m
Specifikace
Název | NETSET U/UTP Cat. 5e outdoor | ||
Typ zboží | |||
Výrobce | Dipol | ||
Značka | NETSET | ||
Typ kabelu | U/UTP | ||
Aplikace | Externí | ||
Category | 5e | ||
Délka kabelu | m | Sold per meter | |
CPR class | FCA | ||
Fyzikální vlastnosti | |||
Žila | Material | Cooper | |
Průměr | mm | 0,5 | |
Izolace vodiče | Material | HDPE (polyethylene) | |
Průměr | mm | 0,87 | |
Kroucené páry | colors | white-brown/brown, white-blue/blue, white-orange/orange, white-green/green | |
plášť | Material | LDPE | |
Průměr | mm | 5,2 | |
thickness | mm | 0,55 | |
Barva | RAL9005 (black) | ||
No | |||
Nosný kabel | No | ||
Rip-cord | Ano | ||
Drážkování | No | ||
Chyba tisku značky délky | <0.5 | ||
Elektrické vlastnosti | |||
Impedance | Ω | 100 | |
Rychlost šíření NVP | 67 | ||
Zpoždění zkreslení | ns/100 m | <45 | |
Stejnosměrný odpor | Ohm/100 m | 9,5 | |
Asymetrie odporu | <5 | ||
Ztráty zpětného toku | 1 MHz | ≥dB | 20 |
4 MHz | ≥dB | 23 | |
8 MHz | ≥dB | 24,5 | |
10 MHz | ≥dB | 25 | |
16 MHz | ≥dB | 25 | |
20 MHz | ≥dB | 25 | |
25 MHz | ≥dB | 24,3 | |
31.25 MHz | ≥dB | 23,6 | |
62.5 MHz | ≥dB | 21,5 | |
100 MHz | ≥dB | 20,1 | |
Ztráty | 1 MHz | ≤dB | 2 |
4 MHz | ≤dB | 4,1 | |
8 MHz | ≤dB | 5,8 | |
10 MHz | ≤dB | 6,5 | |
16 MHz | ≤dB | 8,2 | |
20 MHz | ≤dB | 9,3 | |
25 MHz | ≤dB | 10,4 | |
31.25 MHz | ≤dB | 11,7 | |
62.5 MHz | ≤dB | 17 | |
100 MHz | ≤dB | 22 | |
NEXT (přeslech na blízkém konci) | 1 MHz | ≤dB | 65,3 |
4 MHz | ≤dB | 56,3 | |
8 MHz | ≤dB | 51,8 | |
10 MHz | ≤dB | 50,3 | |
16 MHz | ≤dB | 47,2 | |
20 MHz | ≤dB | 45,8 | |
25 MHz | ≤dB | 44,3 | |
31.25 MHz | ≤dB | 42,9 | |
62.5 MHz | ≤dB | 38,4 | |
100 MHz | ≤dB | 35,3 | |
PSNEXT (součet výkonových přeslechů na blízkém konci) | 1 MHz | ≥dB | 62,3 |
4 MHz | ≥dB | 53,3 | |
8 MHz | ≥dB | 48,8 | |
10 MHz | ≥dB | 47,3 | |
16 MHz | ≥dB | 44,4 | |
20 MHz | ≥dB | 42,8 | |
25 MHz | ≥dB | 41,3 | |
31.25 MHz | ≥dB | 39,9 | |
62.5 MHz | ≥dB | 35,4 | |
100 MHz | ≥dB | 32,3 | |
ELFEXT | 1 MHz | ≥dB | 63,8 |
4 MHz | ≥dB | 51,8 | |
8 MHz | ≥dB | 45,7 | |
10 MHz | ≥dB | 43,8 | |
16 MHz | ≥dB | 39,7 | |
20 MHz | ≥dB | 37,8 | |
25 MHz | ≥dB | 35,8 | |
31.25 MHz | ≥dB | 33,9 | |
62.5 MHz | ≥dB | 27,9 | |
100 MHz | ≥dB | 23,8 | |
PSELFEXT (součet výkonových přeslechů na vzdáleném konci) | 1 MHz | ≥dB | 60,8 |
4 MHz | ≥dB | 48,8 | |
8 MHz | ≥dB | 42,7 | |
10 MHz | ≥dB | 40,8 | |
16 MHz | ≥dB | 36,7 | |
20 MHz | ≥dB | 34,8 | |
25 MHz | ≥dB | 32,8 | |
31.25 MHz | ≥dB | 30,9 | |
62.5 MHz | ≥dB | 24,9 | |
100 MHz | ≥dB | 20,8 | |
Mechanické vlastnosti | |||
Provozní teplota | °C | -20...+70 | |
Teplota pokládky | °C | -30...+50 | |
Minimální poloměr ohybu pro vnitřní instalaci | Průměr | >8 |