MŮJ KOŠÍK
Můj košík je prázdný

CCTV cable: CAMSET 50 75-0.59/3.7+2x0.50
(92% braid coverage, 2 power cables up to 230V AC) [1m]
Kód zboží: M6050_1
Zboží je stáhnuto z nabídky
CCTV cable: CAMSET 50 75-0.59/3.7+2x0.50<br />(92% braid coverage, 2 power cables up to 230V AC) [1m]
Close-up
CAMSET 50 M6050 is a top quality cable designed for powering analog CCTV cameras and transmitting video signals. It is produced by renown European cable plant.
The latest high-performance analog CCTV cameras require appropriate quality of transmission medium. It is unacceptable to use them with low-quality, quickly degrading cables.
CAMSET cables have excellent parameters and are produced under strict technological discipline. They guarantee perfect and stable video transmission.
Main features of CCTV CAMSET 50 M6050 cable:
  • highest-quality materials, strict technological discipline confirmed by a 6-year quality guarantee,
  • 92% copper braid coverage,
  • two copper power wires up to 230V AC, of 0.50 mm2 intersection (each wire),
  • wide temperature range of installation and operation,
  • preliminary quality control of materials and thorough tests of the final product,
  • typical size of RG-59 cable: copper core diameter - 0.59 mm, braid diameter - 3.7 mm, outer diameter - 6.15 mm,
  • meter markers,
  • three packagings:
  • 100m M6000_100 (coil covered with foil),
    200m M6000_200 (coil covered with foil),
    500m M6000_500 (spool).
The CAMSET family consists of:
  • CAMSET solo M6000 - coaxial cable,
  • CAMSET 50 M6050 - coaxial cable with additional two power wires 0.5 mm2,
  • CAMSET 100 M6100 - coaxial cable with additional two power wires 1.0 mm2.
Every CAMSET cable has the same coaxial part.
CCTV cable: CAMSET solo 75-0.59/3.7<br />(92% braid coverage) [1m]
CCTV cable: CAMSET 50 75-0.59/3.7+2x0.50<br />(92% braid coverage, 2 power cables up to 230V AC) [1m]
CCTV kabel YAP 75-0.65/3.7 +2 x1.0 (90% pokrytí opletením, 2 napájecí žíly až do 230VAC) 1m
CAMSET solo M6000
CAMSET 50 M6050
CAMSET 100 M6100
Composite CAMSET 50 M6050 cable consists of coaxial part and two insulated copper wires of 0.50 mm2 intersection (each wire) for powering the camera. The thickness of the double insulation allows to power the camera even from 230V AC line. Of course the cable can operate at typical voltages of 12 or 24 V.
More on powering CCTV cameras with composite cables (coaxial cables with additional power wires) you can read in the article Internet CCTV GUIDE - power supplies and accessories.
In the case of line where voltage drop reaches 10% or more of the rated supplying voltage one should use CAMSET 100 M6100 with 1mm2 power wires, or consider changing the voltage to a higher level (24 V or 230 V).
CAMSET solo M6000, CAMSET 50 M6050, CAMSET 100 M6100 have been designed and manufactured according to European norms: EN 50395:2005, EN 50396:2005, EN 60228:2005, EN 60811-1-2, EN 50117-2-4:2005/A1:2008, IEC 1196-1, EN 501117.
CAMSET cables come with 6-year warranty.

The warranty covers all manufacturing flaws that could be an effect of using defected materials, improper technical solutions or production process.
The manufacturer guarantees stability of the parameters given in the "Specifications" at least for six years, on the condition that the cable is packed, transported, installed, and used according to adequate European norms, within the listed environmental conditions (see the Specifications below).

CAMSET solo M6000, CAMSET 50 M6050, CAMSET 100 M6100 have braid made with 80 copper wires of 0.20 mm diameter, which ensures 92% braid coverage. Such thick braid, compliant with the highest standards, ensures effective electromagnetic shielding. It eliminates the influence of external electromagnetic fields and does not allow to radiate any significant part of the energy of the transmitted signal as electromagnetic field. In the market there are many types of cables with various parameters. As a decent standard there are recognized coaxial cables with braided screen composed of 64 wires of 0.15 mm diameter. The cables offered by DIPOL have even more wires, made of copper (instead of popular aluminum braid).
CAMSET solo M6000, CAMSET 50 M6050, CAMSET 100 M6100 cables are very carefully tested during manufacturing process and then pass final quality control. The measured parameters are determined by the norms mentioned above.

The basic tests include:

  • strength testing of the sheath made of modified PVC (tensile test before and after aging process in thermal chamber: 100 oC / 168 hours, -30oC / 20 hours),
  • resistance to squeezing at 80 oC,
  • insulation resistance at 4.2 kV AC and 6.3 kV DC,
  • resistance to winding stresses in low temperature (-55 oC),
  • measurement of the resistance between conductors (min. 500 Mohm)
  • sheath resistance to test voltage of 2 kV AC, for 1 minute (after immersion in water),
  • measurement of wave impedance,
  • measurement of specific capacitance
  • resistance of power wire insulation to at least 600 V.
The first of the tests allows to confirm high mechanical parameters of the sheath, guarantying resistance to breaking and long life of the cables.
The CAMSET solo M6000, CAMSET 50 M6050, CAMSET 100 M6100 cables have been designed for indoor applications (lack of resistance to UV radiation). They can be used in a wide temperature range: -40...+70 oC (and installed between 0 and +50 oC). The sheath is made of white PVC (for outdoor applications there are usually used cables in black PE sheath).
CAMSET solo M6000 and the coaxial parts of CAMSET 50 M6050 and CAMSET 100 M6100 have the core made of copper wire of 0.59 mm diameter. The cables are compatible with the connectors suitable for RG-59.
Some manufacturers offer cheaper cables with steel wire covered with copper. This construction considerably increases attenuation of the signals transmitted in CCTV systems. It also makes such cables much more stiff, which is very inconvenient during installation process.
CAMSET cables have length marks printed at intervals of one meter, which help to measure out desired sections. The marks are made by officially approved device.
The cables are available in 100 or 200 m rolled coils covered with foil, and 500 m spools. The coils enable the users to pull out relevant sections of the cable just out of the middle of the coil. For professional use we recommend the 500 m spools.

Specifications
NameCAMSET 50
CodeM6050
Impedance of coaxial cable [Ω]

75

+/- 3

Capacitance of coaxial cable [pF]

67

+/- 2

Wave reduction factor [%]66
Operating temperature [oC]-40...+70
Operating relative humidity [%]0...100
Installation temperature [oC]0...+50

Minimum bending radius

[radius to diameter ratio]

>5
Weight [kg/km] 
Coaxial core
Materialcopper
Kindsolid wire
Diameter [mm]

0.59

+/- 0.01

Resistance [Ω/km]59.2
Coaxial dielectric
MaterialPE
Outer diameter [mm]

3.7

+/- 0.1

Braid
Percentage of braid coverage [%]92
Number of wires [pc]80
Wire diameter [mm]0.20
Resistance [Ω/km]7.6
Coaxial sheath
Materialwhite PVC
Outer diameter [mm]6.15
Thickness [mm]0.80
Power cables
Number of wires [pc]2
Intersection [mm2]0.50
Structurestranded copper wire
Maximum voltage [VAC]230
Resistance [Ω/km]39.0
Resistance of isolation at 70 oC [kΩ/km]13.0
Outer diameter [mm] 
Attenuation
Frequency [MHz]Attenuation [dB/100m]
11.0
507.7
10011.1
20016.2
30020.4
50027.2
80035.5
100040.4
150050.1
200056.6
Installing Platinum BNC connector and S-55 quick adapter on CAMSET CCTV cable
Price for 1m
Zboží je stáhnuto z nabídky
 
CCTV cable: CAMSET 50 75-0.59/3.7+2x0.50
(92% braid coverage, 2 power cables up to 230V AC) [1m]
Kód zboží: M6050_1