Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Kód zboží: R48612
Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Signal ZPZ-12 surge protection installation box R48612 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects all the satellite and terrestrial TV paths (12) against voltage surges induced in signal lines by lightning strokes.

The box has been equipped with 12 Signal TV-Sat surge protectors R48602 that can protect:
  • satellite paths from 2 satellites (8 coaxial lines - 4 polarization-band pairs from each satellite),
  • 2 terrestrial radio paths (FM, DAB),
  • 2 DVB-T paths (UHF1, UHF2).
Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Key features
  • 12 surge protectors for 12 signal lines,
  • for outdoor or indoor use, made of PA 11 aluminum alloy, powder-painted in RAL 7035,
  • sealed and earthed door, mounted on two hinges, closed with a cylinder lock,
  • wall- mounted,
  • holes for cables with elastomer cable glands,
  • grounding connector (6 mm diameter, with cable eyelet),
  • cardboard packaging.
The box should be used at the input of a SMATV system, between antennas and the first active components (usually SAT/TV amplifiers). The box has to be grounded pursuant to the applicable regulations.
The construction of the box allows for the use of different types of F connectors and easy organization of coaxial cables. The recommended cable for connecting the protectors with antenna equipment is Triset-113 PE E1017, the best F-connectors are MASTER F 113 E80342. The output cables can also be Triset-113 PE E1017, or - in the case of long distances - Triset-11 PE E1025 (terminated with MASTER 11 E80362 F connectors).
Specifications
NameSurge Protection Installation Box Signal ZPZ-12
CodeR48612
Number of surge protectors12
Mounting
To a wall, 4 holes with 5.6 mm diameter, 234x180 rectangular base
Cable routing method
Top to bottom
Input/output connectors
F-f
Working environmentIndoor/outdoor
Number of input holes (glands)
12
Number of output holes (glands)
12
Diameter of input/output holes [mm]16.5
Cable glands
24; PDEN 16M thermoplastic TPE elastomer, for 5-11 mm cables
Box material
PA 11 aluminum alloy
Finishing
RAL 7035
Door
Grounded, rubber gasket in the body, two hinges, cylinder lock
Grounding connector
Yes, diam. 6 mm, cable eyelet
Dimensions [mm]305x250x110
Weight [kg]2.0
Surge protector paths
Operating band [MHz]5 - 2400
Inputs
F-f
Outputs (via the installed adapters)
F-f
Insertion loss [dB]typ. 0.8 at 1 GHz
typ. 1.2 at 2 GHz
Return loss [dB]typ. 12
Maximum current (8/20 µs) [kA]8
Impedance [Ω]75
DC pass-throughYes
DC breakdown voltage at 100 V/s [V]230 +/-42
Screening efficiency [dB]> 90 (EN 50083-2/A1; A class)
Protection level at 1 kV/µs [V]≤ 800
 
Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Kód zboží: R48612