Insulation Adhesive Tape: PVC SCAPA 2702
(0.13*15mm/10m, black)

Kód zboží: E9821
14,33 Kč
Cena s DPH Sleva Množství platnost
14,33 Kč 0 % od 1 ks.
Dostupný
SCAPA 2702 is a 0.13mm thick, lead free, self-extinguishing, plasticized PVC insulation tape using an aggressive pressure-sensitive rubber-based adhesive system. This premium quality product is manufactured in Europe by ***SCAPA GROUP plc***www.scapa.com*** according to international standards and with focus on environmental safety.

Záruka

Záruka - 2 roky.

Podrobný popis

SCAPA 2702 (E9821) is a 0.13mm thick, lead free, self-extinguishing, plasticized PVC insulation tape using an aggressive pressure-sensitive rubber-based adhesive system. This premium quality product is manufactured in Europe by SCAPA GROUP plc according to international standards and with focus on environmental safety.
Distinguishing features of the PVC tape:
  • High quality materials ensure maximum longevity;
  • Aggressive pressure-sensitive rubber-based adhesive system ensure good adhesion to the substrate;
  • High elasticity and (180%) and tensile strength (25N/cm)
  • Self-extinguishing PVC;
  • Good resistance to abrasion, corrosion and moisture;
  • High dielectric strength;
  • Approved by IMQ i VDE*;
  • Conforms to BS3924;
  • Operating temperature: 0
* The VDE is Der Verband der Elektrotechnik, Elektronik und Informationstechnik (the German Association for Electrical, Electronic and Information Technologies), a professional body based in Frankfurt am Main, Germany. VDE Certification Marks are known and respected around the world. The VDE Mark indicates conformity with the VDE standards or European or internationally harmonized standards and confirms compliance with protective requirements of the applicable EC Directive(s).
APPLICATIONS:
  • electrical cables wrapping,
  • color coding,
  • cable sealing,
  • protection for low and medium voltage (max 600V) cable splices.
NOTICE!

At temperatures below 0oC use self-amalgamating tapes: E9751 and E9755.
RECOMMENDATIONS:

Rolls should be stored flat in the original packaging. They have to be protected from dust, heat, moisture, direct sunlight and solvent fumes. The storage temperature should be between +10oC and +25oC.

The tape should be applied with sufficient tension to ensure an optimum bonding and minimum of two layers with a half overlap. The final layer should be wrapped with a lower tension to prevent flagging effects.

The surfaces should be clean, dry, free of dust, grease, oil or other contaminants.

Specifikace

Typ zboží Insulating tape
Výrobce SCAPA
Barva Black
Length m 10
Šířka mm 15
thickness mm
Odolnost proti propíchnutí Zkušební metoda: ASTM D149 kV/mm 40
Rozsah instalačních teplot Zkušební metoda: CEI EN 60454 °C 0...+90
Prodloužení při přetržení Zkušební metoda: CEI EN 60454 180
Zlomová síla Zkušební metoda: CEI EN 60454 N/cm 25
Hořlavost Zkušební metoda: CEI EN 60454 Self-extinguishing