A short instructional video on crimping RJ-45 connector on a category 6 UTP cable, according to the EIA/EIA 568B standard. The items used: NETSET U/UTP cat. 6 cable, 8-pin RJ-45 modular plug, modular plug boot, HT-210N crimping tool, cable tester NS-468AT.
Podrobný popis
- High-rise buildings (WW) with a height of more than 55 m above ground level
- High-rise buildings (W) with a height of more than 25 m to 55 m above ground level or residential buildings with the number of floors above ground level from 9 to 18 inclusive
- Buildings in human risk category ZL I with rooms intended for simultaneous presence of more than 50 people who are not permanent users, and not intended primarily for use by people with reduced mobility
- Buildings in human risk category ZL II – intended primarily for use by people with reduced mobility, such as hospitals, nurseries, kindergartens, nursing homes
- Buildings in human risk category ZL III – commercial buildings not classified unser ZL I and ZL II
- Buildings in human risk category ZL IV – residential
- Buildings in human risk category ZL V – collective residence not classified under ZL I and ZL II
- PM and IN buildings (production buildings, warehouses, livestock etc.).
- top quality materials, made to tight specifications, proven with a, 15-year quality guarantee,
- flammability class B2ca-s1a-d1-a1
- preliminary quality control of materials and thorough tests of the finished product,
- meter markers,
- cooper solid wires diameter 0.565 mm,
- insulation of conductors made of insulating, mass-coloured HDPE, conductor diameter: 0.98 mm, insulation colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
- cable sheath made of LSZH compliant material, outer diameter 6.4 mm,
- length marker print error max. 0.5%
EN50575:2014, EN60332-1-2:2004, EN50399:2011, EN60754-2:2014, EN 13501-6:2014.
- Return Loss
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 20.0 |
| 4 | 23.0 |
| 8 | 24.5 |
| 10 | 25.0 |
| 16 | 25.0 |
| 20 | 25.0 |
| 25 | 24.3 |
| 31.25 | 23.6 |
| 62.5 | 21.5 |
| 100 | 20.1 |
| 200 | 18 |
| 250 | 17.3 |
- Attenuation
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 2,03 |
| 4 | 3,78 |
| 8 | 5,32 |
| 10 | 5,95 |
| 16 | 8,47 |
| 25 | 9,51 |
| 31,25 | 10,67 |
| 62,5 | 15,38 |
| 100 | 19,8 |
| 200 | 28,98 |
| 250 | 32,85 |
- NEXT (near end crosstalk)
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 74.3 |
| 4 | 65.3 |
| 8 | 60.8 |
| 10 | 59.3 |
| 16 | 56.2 |
| 20 | 54.8 |
| 25 | 53.3 |
| 31.25 | 51.9 |
| 62.5 | 47.7 |
| 100 | 44.3 |
| 200 | 39.8 |
| 250 | 38.3 |
- PSNEXT (power sum near end crosstalk)
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 72,3 |
| 4 | 63,3 |
| 8 | 58,8 |
| 10 | 57,3 |
| 16 | 54,2 |
| 20 | 51,3 |
| 31,25 | 49,9 |
| 62,5 | 45,4 |
| 100 | 42,3 |
| 200 | 37,8 |
| 250 | 36,3 |
- ELFEXT (equal level far end crosstalk loss testing)
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 67,8 |
| 4 | 55,8 |
| 8 | 49,7 |
| 10 | 47,8 |
| 16 | 43,7 |
| 20 | 41,8 |
| 25 | 39,8 |
| 31,25 | 37,9 |
| 62,5 | 31,9 |
| 100 | 27,8 |
| 200 | 21,8 |
| 250 | 19,8 |
- PSELFEXT (power sum equal level far end crosstalk loss testing)
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 64.8 |
| 4 | 52.8 |
| 8 | 46.7 |
| 10 | 44.8 |
| 16 | 40.7 |
| 20 | 38.8 |
| 25 | 36.8 |
| 31.25 | 34.9 |
| 62.5 | 28.9 |
| 100 | 24.8 |
| 200 | 18.8 |
| 250 | 16.8 |
Specifikace
| Název | NETSET U/UTP cat. 6 | ||
| Typ zboží | |||
| Výrobce | DIPOL | ||
| Značka | NETSET | ||
| Typ kabelu | U/UTP | ||
| Aplikace | Vnitřní | ||
| Category | 6 | ||
| Délka kabelu | m | 500 | |
| CPR class | B2ca s1a,d1,a1 | ||
| Fyzikální vlastnosti | |||
| Žila | Materiál | Cooper | |
| Žila | Průměr | mm | 0,55 |
| Izolace vodiče | Materiál | HDPE (polyethylene) | |
| Izolace vodiče | Průměr | mm | 0,98 |
| Kroucené páry | colors | white-brown/brown, white-blue/blue, white-orange/orange, white-green/green | |
| Twisted pair shield | Materiál | Al/Mylar | |
| plášť | Průměr | mm | 6,4 |
| thickness | mm | 0,75 | |
| Barva | RAL7032 (gray) | ||
| Ne | |||
| Nosný kabel | Ne | ||
| Rip-cord | Ano | ||
| Drážkování | Ne | ||
| Chyba tisku značky délky | % | <0.5 | |
| Elektrické vlastnosti | |||
| Impedance | Ω | 100 | |
| Zpoždění zkreslení | ns/100 m | <45 | |
| Asymetrie kapacity ve vztahu k zemi | pF/100m | 330 | |
| Stejnosměrný odpor | Ohm/100 m | 9,38 | |
| Asymetrie odporu | % | <5 | |
| Ztráty zpětného toku | 1 MHz | ≥dB | 20 |
| Ztráty zpětného toku | 4 MHz | ≥dB | 23 |
| 8 MHz | ≥dB | 24,5 | |
| 10 MHz | ≥dB | 25 | |
| 16 MHz | ≥dB | 25 | |
| 20 MHz | ≥dB | 25 | |
| 25 MHz | ≥dB | 24,3 | |
| 31.25 MHz | ≥dB | ||
| 62.5 MHz | ≥dB | 21,5 | |
| 100 MHz | ≥dB | 20,1 | |
| 200 MHz | ≥dB | 18 | |
| 250 MHz | ≥dB | 17,3 | |
| Ztráty | 1 MHz | ≤dB | 2 |
| Ztráty | 4 MHz | ≤dB | 3,78 |
| 8 MHz | ≤dB | 5,32 | |
| 10 MHz | ≤dB | 5,95 | |
| 16 MHz | ≤dB | 8,47 | |
| 20 MHz | ≤dB | 9,3 | |
| 25 MHz | ≤dB | 9,51 | |
| 31.25 MHz | ≤dB | 10,67 | |
| 62.5 MHz | ≤dB | 15,38 | |
| 100 MHz | ≤dB | 19,8 | |
| 200 MHz | ≤dB | 28,98 | |
| 250 MHz | ≤dB | 32,85 | |
| NEXT (přeslech na blízkém konci) | 1 MHz | ≤dB | 74,3 |
| NEXT (přeslech na blízkém konci) | 4 MHz | ≤dB | 65,3 |
| 8 MHz | ≤dB | 60,8 | |
| 10 MHz | ≤dB | 59,3 | |
| 16 MHz | ≤dB | 56,2 | |
| 20 MHz | ≤dB | 54,8 | |
| 25 MHz | ≤dB | 53,3 | |
| 31.25 MHz | ≤dB | 51,9 | |
| 62.5 MHz | ≤dB | 47,7 | |
| 100 MHz | ≤dB | 44,3 | |
| 200 MHz | ≤dB | 39,8 | |
| 250 MHz | ≤dB | 38,3 | |
| PSNEXT (součet výkonových přeslechů na blízkém konci) | 1 MHz | ≥dB | 72,3 |
| PSNEXT (součet výkonových přeslechů na blízkém konci) | 4 MHz | ≥dB | 63,3 |
| 8 MHz | ≥dB | 58,8 | |
| 10 MHz | ≥dB | 57,3 | |
| 16 MHz | ≥dB | 54,2 | |
| 20 MHz | ≥dB | 52,8 | |
| 25 MHz | ≥dB | 51,3 | |
| 31.25 MHz | ≥dB | 49,9 | |
| 62.5 MHz | ≥dB | 45,4 | |
| 100 MHz | ≥dB | 42,3 | |
| 200 MHz | ≥dB | 37,8 | |
| 250 MHz | ≥dB | 36,3 | |
| ELFEXT | 1 MHz | ≥dB | 67,8 |
| ELFEXT | 4 MHz | ≥dB | 55,8 |
| 8 MHz | ≥dB | 49,7 | |
| 10 MHz | ≥dB | 47,8 | |
| 16 MHz | ≥dB | 43,7 | |
| 20 MHz | ≥dB | 41,8 | |
| 25 MHz | ≥dB | 39,8 | |
| 31.25 MHz | ≥dB | 37,9 | |
| 62.5 MHz | ≥dB | 31,9 | |
| 100 MHz | ≥dB | 27,8 | |
| 200 MHz | ≥dB | 21,8 | |
| 250 MHz | ≥dB | 19,8 | |
| PSELFEXT (součet výkonových přeslechů na vzdáleném konci) | 1 MHz | ≥dB | 64,8 |
| PSELFEXT (součet výkonových přeslechů na vzdáleném konci) | 4 MHz | ≥dB | 52,8 |
| 8 MHz | ≥dB | 46,7 | |
| 10 MHz | ≥dB | 44,8 | |
| 16 MHz | ≥dB | 40,7 | |
| 20 MHz | ≥dB | 38,8 | |
| 25 MHz | ≥dB | 36,8 | |
| 31.25 MHz | ≥dB | 34,9 | |
| 62.5 MHz | ≥dB | 28,9 | |
| 100 MHz | ≥dB | 24,8 | |
| 200 MHz | ≥dB | 18,8 | |
| 250 MHz | ≥dB | 16,8 | |
| Mechanické vlastnosti | |||
| Provozní teplota | °C | -20...+70 | |
| Teplota pokládky | °C | 0...+50 | |
| Minimální poloměr ohybu pro vnitřní instalaci | Průměr | >8 | |
| Balení | |||
| Spool | Průměr | mm | 380 |
| Spool | Šířka | mm | 385 |
| průměr otvoru uvnitř cívky | mm | 33 | |
Videa
How to attach RJ-45 connector to cat 5 UTP cable. Male RJ-45 connector J2008 (8P8C category 5e for UTP/FTP cables with solid wires) used for computer network cables. NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs). Crimping Tool HT-210N J9210 for RJ-45 plugs. Cable Tester (RJ-45, RJ-11) N7055 helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.


