Koaxiální kabel 75 Ohm TRISET PLUS Dca LSZH
ztída A+ 1,13/4,8/6,8 110 dB [500m]

Kód zboží: E1016_500
7898,88 Kč 9292,80 Kč
Předchozí nejnižší cena: 8063,44 Kč
Cena s DPH Sleva Množství platnost
9292,80 Kč 0 % -
7898,88 Kč 15 % od 1 ks. 2025-03-02
od 0,00 Kč
Dostupný

Záruka

Záruka - 10 let.

Podrobný popis

High quality TRISET PLUS coaxial cable is E1016_500 dedicated for both, individual and community antenna systems, LSZH (LS0H) - halogen-free sheath, is used in places where increased fire safety is required (high-rise and residential buildings, public buildings). It can be successfully used in digital terrestrial television systems for distribution of DVB-T, FM/DAB, DVB-S/S2 broadcasts (also in multiswitch systems).
Koaxiální kabel 75 Om TRISET PLUS Dca LSZH <br /> třída A+ 1,13/4,8/6,8 110 dB [100m]
Inner cooper conductor with a diameter of 1.13mm and triple shield - Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) boded to the sheath.
Note: as of March 2021, TRISET PLUS Dca LSZH E1016 cable has replaced:
Key features
  • complies with A+ class requirements,
  • reaction to fire class compliant with CPR - Dca-s2, d1, a1,
  • LSZH (LS0H) - halogen-free sheath,
  • triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath,
  • passed IEC 68-2-3 Steady State Damp Heat test,
  • 1.13mm copper core,
  • low loss,
  • excellent impedance matching,
  • high screening efficiency - meeting the class A++ requirements in most of the range,
  • 81% braid coverage,
  • 5-year warranty.



Construction Products Regulation (CPR) - koaxiální kabely a kroucená dvojlinka doporučené pro slaboproudé systémy v budovách pro více rodin.



For more on cable fire resistance classes, read The CPR Directive - the new cable order
TRISET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized standard that specifies reaction to fire performance requirements, test and assessment methods for cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.
Koaxiální kabel 75 Om TRISET PLUS Dca LSZH <br /> třída A+ 1,13/4,8/6,8 110 dB [100m]
TRISET PLUS E1016 75 ohm coaxial cable has been examined by L.S. Fire Testing Institute Srl notified body (NB 2479) and got Dca-s2, d1, a1 reaction to fire class.
TRISET PLUS E1016 75 ohm coaxial cable complies with the EN50117 standard and A class requirements in the whole 5...3000 MHz transmission frequency range.

The cable has a declaration of conformity with CPR, LVD, RoHS.



The cable is sold in the quantities:
Graph showing FIGRA (fire growth rate) and THR (total heat rate) for TRISET PLUS Dca LSZH Class A+ E1016. FIGRA is an indicator of the flame spread rate used for the classification of classes B1ca, B2ca, Cca and Dca. At time t = 398 sec. FIGRA = 323 W/s (red line). THR is the total heat release between the beginning and the end of the test at 1200 sec. (excluding the fire initiating source). At the time t = 1200 sec. THR was 15.3 MJ. According to EN 50399 (20.5 kW Burner) the FIGRA is ≤ 1300 W/s. and the THR is ≤ 70 MJ.


Graph showing the heat release rate (HRR) for TRISET PLUS Dca LSZH Class A+ E1016 cable. HRR is the heat release rate, the rate of heat release averaged over a 30-second moving average. At the time t = 513 sec. HRR = 65.1 kW. According to EN 50399 (20.5 kW Burner) the HRR is ≤ 400 kW.
Graph showing the smoke production rate (SPR) for TRISET PLUS Dca LSZH Class A+ E1016 cable. SPR is the smoke production rate averaged over a 60-second moving average. At the time t = 504 sec. SPR = 0.11 m2
Graph showing the total smoke production (TSP) for the TRISET PLUS Dca LSZH Class A+ E1016 cable. TSP is the total amount of smoke released from the beginning to the end of the test. At the time t = 1200 sec. TSP = 28.7 m2.
TRISET PLUS E1016 has 81% braid coverage to guarantee high screening efficiency and protect the transmitted signals against interference.

High quality, triple shielded (Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath) RG6 coaxial cable has an inner conductor made of 1.13 mm diameter copper wire, which ensures very low insertion loss. The core dose not corrode, and the cable is not stiff.
Thanks to high quality and excellent parameters the TRISET PLUS E1016 cable enjoys great popularity among many installers. Optimum flexibility of the sheath allows for easy cable installation in shafts, as well as installation or junction boxes.
The cable is manufactured under strict quality standards, with tight tolerances.
In order to secure the minimum bend radius, flush mounted installations should be done with the use of protective conduits.

Screening efficiency of TRISET PLUS cable in the 30-3000 MHz range
and requirements for the A+ class.
Transfer impedance of TRISET PLUS cable in the 5-30 MHz range
and requirements for the A+ class.

Return loss in the 5-2400 MHz frequency range
Signal propagation velocity in the 5-2400 MHz frequency range
The increase of attenuation after the accelerated aging test (IEC68-2-3) is below 5%.
Coaxial cables undergo a natural aging process which results in increasing attenuation. The quality of a cable in the process of accelerated aging is tested according to IEC68-2-3 standard. The Triset cable passed the test and its quality is guaranteed by a 5-year warranty.

Note ! The TRISET PLUS LSZH Dca E1016 cable has replaced the TRISET HF E1019 version. From March 1, 2021, TRISET PLUS E1016 is manufactured with the LSZH (HF) sheath.
According to the EN50117 norm,coaxial cables are divided into the following classes, depending on their screening efficiency: C, B, A, A+, A++.
Taking into consideration cables for antenna systems, Triset 113 has the highest screening efficiency, between A and A+.
Classes of screening efficiency
Class\freq. range
5-30 MHz [mΩ/m] 30-1000 MHz [dB] 1-2 GHz [dB] 2-3 GHz [dB]
C 50 75 65 55
B 15 75  65 55
A 5 85  75 65
A+ 2.5 95  85 75
A++ 0.9 105  95 85

 

 

Price for 500m

Specifikace

Typ zboží Coaxial cable
type TRISET PLUS
Značka TRISET
Délka kabelu m 500
Aplikace
Třída kabelů RG-6
Compliance with relevant national legislation Ano
CPR class Dca
Kabel naplněný gelem No
Fyzikální vlastnosti
Impedance Ω 75
Screening efficiency class A+
Přenosová impedance TI mΩ/m <1.2
Žila Material
Žila Průměr mm 1,13
Dielektrikum pěnění Physical
Dielektrikum Průměr mm 4,8
Displej
Počet vrstev 3
První folie přilepené k dielektriku Ano
První folie Material Al/PET/SY
Rozměry μm 40/12/30
celková tloušťka μm 85
Opletení Material
Opletení průměr drátu mm 0,12
počet drátů pcs. 24 × 6
úhel vinutí stupeň 18,13
pokrytí 81
Druhá fólie přilepená k plášti Ano
Druhá fólie Material Al/PET
celková tloušťka μm 25
plášť Material LSZH
plášť thickness mm 0,64
Průměr mm 6,85
Barva
Elektrické vlastnosti
Odolnost při 20°C Ω/km 16,85
capacity pF/m 52
Faktor redukce vlnění 84
Mechanické vlastnosti
Provozní teplota °C -30...+70
Teplota pokládky °C -5...+40
Minimální poloměr ohybu mm 70 (single) 140 (repeated)
Balení
Spool Průměr mm 390
Spool Šířka mm 280
průměr otvoru uvnitř cívky mm 53
Délka kabelu m 500

Videa

Instalace konektorů MASTER typu F a BNC

Krátkou prezentaci, jak komprimovat F konektor na TRISET-113 kabelem a BNC konektoru na RG-59 kabelu.

Zakončovací vedení v telekomunikační krabici

Praktická realizace domovní krabice.

F connector E80274 Platinum crimping on Triset 113 coaxial cable

Top-quality F-connector Platinum for use on TRISET-113 coax. The connector has been designed to ensure watertightness (after crimping) both from the side of the cable and the device. During compression of the connector another plastic bush is tightly pressed against the sheath of the cable (by putting on cone brass case - the compression ring). The plastic material is protected by patent Delrin of well known for quality of products DuPont company. It is UV-proof, and ensures stable physical parameters in very wide temperature range. The metal parts of the connector made of nickel-plated brass are corrosion-proof.