Napájení
PoE
PoE Extender Switch: ATTE xPoE-4-11-HS
Kód zboží: N29810
View of the xPoE‑4‑11‑HS device
 |  |
View of the sides with connectors
Key features:
- four RJ45 10/100 Mbps ports (auto MDI-MDIX),
- ability to power three PoE 802.3at/af or PASSIVE devices,
- possibility to switch off selected PoE ports,
- clear, optical indication of the power and data transmission status,
- powered only with another 802.3at/af or PoE PASSIVE switch (via PoE IN),
- up to 40 W total distributed power,
- electronic protection of PoE IN,
- cascadable (xPoE switches can be connected in series),
- plug&play solution (no configuration of parameters needed),
- PoE standard selection(at/af),
- low power consumption by the unit (<1.5 W).
xPoE-4-11-HS operates as repeater/extender of a LAN connection with PoE function. It is designed to work with IP cameras and other network devices powered in the PoE 802.3at/af and PoE PASSIVE standards. The device regenerates the network signal and transfers the PoE to the selected outputs. It is usually used for extending a PoE network line beyond 100 meters, and/or to create an additional branch network, e.g. by splitting it to connect several PoE devices such as IP cameras. The housing of the extender (Heat Shrink, HS) is a well-thought-out solution ensuring insulation and the smallest possible dimensions of the device. The small size gives a wider choice of mounting locations.
Specifications
| Name | xPoE-4-11-HS |
| Code | N29810 |
| Standard | IP |
| LAN ports | 4: 10/100 Mbps (auto MDI-MDIX, auto-negotiation) |
| Supported PoE devices (standard / max load) | 802.3af: 15.4 W - LAN2...LAN4 802.3at: 30 W - LAN2...LAN4 PoE PASSIVE: 40 W - LAN2...LAN4 |
| Supported PoE injectors (standard / max power) | LAN1 802.3af: 15.4 W 802.3at: 30 W PoE PASSIVE: 40 W LAN2...LAN4 PoE PASSIVE: 70 W |
| PoE outputs (standard / mode) | LAN3...LAN4 PoE PASSIVE / mode B (4,5 +) (7,8 -) LAN2 PoE PASSIVE / mode A: (1,2 +) (3,6 -), mode B: (4,5 +) (7,8 -) |
| PoE LAN1 input (standard / mode) | LAN1 802.3at, 802.3af, PASSIVE / mode A: (1,2 +/-) (3,6 +/-), mode B: (4,5 +/-) (7,8 +/-) |
| Other PoE iputs (standard / mode) | LAN2 PASSIVE / mode A: (1,2 +) (3,6 -), mode B: (4,5 +) (7,8 -) LAN3...LAN4 PoE PASSIVE / mode B (4,5 +) (7,8 -) |
| PoE input protection (overload / short-circuit) | LAN1 0.75 A (electronic, auto-reset) |
| SW1 switch (between LAN1/LAN2) | PoE standard selection (at/af) for LAN1+PoE IN (determines detection of the xPoE by the switch with PoE supplying) |
| JP1 / JP2 jumper | LAN3 / LAN4 |
| Input voltage range | LAN1: Vin 35...56 VDC LAN2...LAN4: Vin 12...56 VDC |
| Output voltage for PoE devices | Vout = Vin |
| Operating temperature range | -20°C...+40 °C |
| Housing | HS, black plastics |
| IP rating | IP20 |
| Dimensions | 97 x 42 x 19 mm |
| Weight | 0.05 kg |
PoE Extender Switch: ATTE xPoE-4-11-HS
Kód zboží: N29810
