Protect 209 digital mobile recorder (4 x 1080p, H.265, 25 fps, 1 HDD/SSD slot, GPS, 4G, RJ-45)

Kód zboží: M80209
12312,96 Kč
Cena s DPH Sleva Množství platnost
12312,96 Kč 0 % od 1 ks.
od 0,00 Kč
Dostupný

Záruka

Záruka - 2 roky.

Podrobný popis

Key features:
  • Video and audio recording: 4 × AHD up to 1080p and 1 × IP up to 1080p (1 × RJ-45), and CVBS 960H or lower, at 25 fps
  • supports a 2.5" HDD with a capacity of up to 2 TB or a 2.5" SSD with a capacity of up to 8 TB (1 slot)
  • built-in 4G LTE communication module, SIM card slot and external antenna
  • built-in GPS module with external antenna
  • wide power supply voltage range for the recorder: 8–36 V DC; power outputs for 4 AHD cameras
  • built-in UPS enabling recording to continue for up to 8 seconds after a power cut, ensuring data protection
  • recording starts automatically when power is connected
  • automatic hard drive heating enabling recording to start at temperatures as low as −40°C
  • vibration- and shock-resistant design, compliant with the MIL-STD-810G military standard
  • operating temperature range from −40°C to +80°C
  • built-in 3-axis accelerometer (G-sensor) and 3-axis gyroscope, enabling the detection of, amongst other things, sudden acceleration, braking, collisions and sudden changes in direction
The Protect 209 M80209 is a 4-channel mobile recorder designed for use in coaches, city buses, minibuses, trams, the underground, company and private vehicles, as well as special-purpose vehicles, such as TIR lorries, police cars, prison or military vehicles, and ambulances. Its design ensures enhanced resistance to vibrations and shocks.
The DVR is designed to be mounted inside the cab of a vehicle, e.g. under the seat, in a glove compartment etc. The power cables have to be connected to the battery and ignition switch (similar to radio), so that the device automatically begins video and audio recording simultaneously with turning on the ignition. The power circuit is protected by 5 A fuse which protects against excessive current drawing and burning of the wiring in the event of a fault. By default, the recorder runs until the power supply is turned off with the ignition key, unless the delayed turn off function (running for a specified time after switching off) or a schedule function is active. The DVR has also its own power backup and runs for about 8 seconds more to safely save all data.
Diagram of the plug for connecting cameras
Note: An adapter from M12 to BNC connector is not included. It can be purchased separately - PZ-1 M80106.
The Protect 209 has 4 video inputs fitted with M12 connectors. Connecting the cameras allows for quick and secure transmission of the video signal from the cameras, as well as powering the cameras directly from the recorder itself. The recorder enables simultaneous recording from 4 channels at 25 fps for 1080p resolution or lower. The video quality allows for easy recognition of traffic situations, people’s behaviour, and even faces or number plates. It supports both AHD and CVBS signals.
4G LTE connectivity
The device is fitted with a communications module supporting 4G LTE (FDD-LTE/TDD-LTE) and earlier standards (3G and 2G), along with an antenna that must be installed in the vehicle (a separate SIM card is required). This provides continuous, remote access to live video feeds, recordings, location data, route history, speed and vehicle parameters from the connected sensors. If necessary, the device can create copies of recordings. This requires a server with the IVMS software installed.
H.265 compression
The DVR supports H.265 video compression which, compared to its predecessor (H.264), reduces by half the data stream and the demand for disk space. This allows you to use storage media with half the capacity or store recordings twice as long.
GPS module, overload sensor and gyroscope
A GPS antenna is included. When connected, the GPS module turns on automatically and details of the speed and device position are included in the video. Simultaneously, data from acceleration and position sensors (gyroscope) reading data in three axes (X, Y and Z) is always recorded. The device can detect a collision, sharp braking, accelerating or cornering too fast.
Data archiving
Recording of video and audio from the connected cameras is carried out via a single HDD/SDD slot with capacity up to 2 TB. Recordings can be exported to a flash drive or memory card and played back using the included software. The recordings are stored along with the GPS, acceleration and alarm input data in their respective device formats. In addition to searching and playing recordings from cameras, the software enables the use of the additional DVR capabilities including generating a graph of the alarm input activation on a timeline or vehicle position based on the saved GPS coordinates.
Integration with vehicle sensors
The alarm inputs can monitor the vehicle devices plugged into the electrical system. These may include shifting into the reverse, opening the fuel filler door, door closing, seat belt fastening, cargo area opening, brake pressing, indicting etc. Activation of an input can be linked to an alarm action, , e.g. shifting into reverse can display lines on the camera image showing the distance, or switching the image preview to a specific camera.
Control of DVR
The DVR can be controlled with the included IR remote control. The graphical menu is displayed by video output that can be connected to a monitor.
Connecting to monitor
The DVR has 3 video outputs: VGA (1280 X 1024), Cinch (CVBS signal) on 3.5 mm jack connector on the front and M12 socket on I/O connector on the back (CVBS signal).

Specifikace

Model
Značka Protect
Video inputs Počet 4
resolution 1080p
Video inputs connector type M12 plugs, 4-pin – A, on cable
power supply to each channel 12 V, 3 A passive PoE 12V (pin 4/5 +, pin 7/8 -.)
Audio and video signal standards supported PAL, NTSC
Signals supported AHD, CVBS, IP (automatic detection of signal type and resolution)
multiple streams supported Yes, 2 streams per every channel
PAL recording 2 MP fps 25
720p fps 25
D1/CIF fps 25
Komprese videa H.265, H.264
max. video bitrate per channel Mbps 4
Video outputs Označení , RCA
VGA resolution p
M12, RCA resolution 704 x 576
image display layout
Image function support horizontal reflection Ano
mirror reflection Ano
Archiving carriers 1 × HDD/SSD 2.5"
maximum media capacity
data rate for typical recording parameters (H.256, 1080p, 15 fps) 0.4 GB/h
playback DVR, PC application
carrier protection zámek
System OS Linux
language
Operation
user accounts
Alarm interfaces inputs 8
výstupy 1
USB ports Počet 1, USB 2.0
Operation
GPS Ano
Gyroscope Ano, 3-axis
G-Sensor Ano, 3-axis
Provozní teplota °C -40...+80
Provozní vlhkost % 20...95
Napájecí zdroj voltage VDC 8...36
Power consumption W Running <36 Standby <0.5
Dimensions (WxDxH) mm 192 × 184 × 61 (with additional cable housing 248 × 184 × 61)