Podrobný popis
The ULTIMODE PC-1272D-3 patch cord is a single-mode fiber optic cable with a length of 3 meters terminated with SC/UPC and SC/APC connectors.
Patchcord manufactured based on single-mode fiber in the G.657.A2 standard. This standard is characterized by a reduced bending radius. Thanks to this, the patch cord is much less exposed to damage and increased attenuation resulting from excessive bending. This is particularly important when connecting optical fibers in small boxes or cabinets (e.g. frequent cases of patch cords connected to front optical panels being crushed by doors). Patch cords with fiber in the G.657.A2 standard can be used in installations with cabling based on other standards (G.657.A1, G652.D).
ULTIMODE patchcords are manufactured and tested in accordance with the guidelines of the International Electrotechnical Commission IEC 613000-3-34 and IEC 61300-3-6. Each pigtail is accompanied by an appropriate label confirming compliance of the parameters (insertion loss and reflection loss) with the class defined by the above-mentioned. norms. Fiber produced in accordance with the recommendation ITU-T G.657 (11/2016) or ITU-T G.652 (11/2016).
|
| ||||||||||||||||||||||||||||||
Halogen-free coating LSZH (Low Smoke Zero Halogen) with a diameter of 2x 3 mm.
Main features:
- 2xSC/UPC - 2xSC/APC connectors,
- length - 3 m,
- G.657.A2 single-mode fiber,
- LSZH coating,
- diameter 2x3 mm
- connector attenuation < 0.25 dB (Grade B),
- connector reflection attenuation > 60 dB (Grade 1), > 45 dB (Grade 2).
Specifikace
Typ zboží | Patchcord | ||
type | Duplex | ||
Fiber type | |||
Connector type A | SC/UPC, SC/APC | ||
Connector type B | SC/UPC, SC/APC | ||
Connectors | SC/UPC – SC/APC | ||
Fiber standard | G.657A2 | ||
Značka | ULTIMODE | ||
Název | |||
Length | m | 3 | |
Insertion loss (IL) | A connector | dB | < 0.25 (A1, A2) |
Insertion loss (IL) | B connector | dB | < 0.25 (B1, B2) |
Barva | yellow |