MŮJ KOŠÍK
Můj košík je prázdný
 »  CCTV  »  NVR - Hikvision  »  PoE

NVR - Hikvision

PoE

Síťové NVR 4K Hikvision DS-7608NI-I2/8P (8ch, 80Mbps, 2xSATA, Alarm IN/OUT, VGA, HDMI, 8x PoE)
Kód zboží: K22086
Cena bez DPHCena s DPHSlevaplatnost  
21062,40 Kč25485,50 Kč0 %
Záruka - 3 roky
Síťové NVR Hikvision DS-7608NI-SE pro 8 kamer
Přední pohled
Síťové NVR Hikvision DS-7608NI-SE pro 8 kamer
Pohled zezadu
Síťové NVR Hikvision DS-7608NI-SE pro 8 kamer
Příslušenství v balení
Síťové NVR Hikvision DS-7608NI-SE pro 8 kamer
Příslušenství v balení
Síťové NVR Hikvision DS-7608NI-SE pro 8 kamer
Příslušenství v balení
Hikvision DS-7608NI-I2/8P je moderní IP síťový video rekordér schopen sledovat, nahrávat a přehrávat snímky ze 8 IP kamer s megapixelovým rozlišením až do 12MP. Tento model má zabudovaná PoE switch s 8 PoE porty pro připojení a napájení IP kamer. Tento samostatný NVR s VGA (do 1080p) a HDMI (do 4K) výstupy může být přímo připojen k monitoru bez nutnosti dalšího počítače. Každý monitor dokáže zobrazovat video z libovolné kamery, v jakémkoli rozdělení obrazovky.
NOTE! Current software version is available
Key features:
  • Rozlišení záznamu až 12 MP
  • Rozlišení nezávislých video výstupů: HDMI až 4K @ 30/60 Hz, VGA až do 1080p @ 60Hz
  • Maximální celková šířka pásma (vstup / výstup): 80/256 Mbps
  • Podpora až 8 IP kamer (Hikvision nebo ONVIF-kompatibilní)
  • Zabudovaný PoE switch 8 portů
  • Synchronní přehrávání nahrávek z 8 kanálů
  • Místo pro dva SATA HDD, každý 6 TB
  • Podpora video komprese H.265 / H.264 + / H.264 / MPEG4
  • VCA funkce (detekce obličeje, rozpoznávání SPZ, překročení virtuální linie, narušení oblasti atd.)
  • Podpora pro funkci ANR
  • Kanál 0 - možnost sledovat všechny kamery s minimálními nároky na šířku pásma sítě
  • USB 2.0, USB 3.0 a RS232
  • Poplachové vstupy / výstupy: 4/1
  • Monitorování stavu LAN, kamery, HDD
Support for intelligent VCA events
The DVR supports VCA alarms (e.g., line crossing, intrusion detection, area entry and exit, etc.) that can be generated and sent by Hikvision IP cameras. To use this functionality, the camera must support the VCA alarm in question. When a triggering criterion is met, a specific alarm action can be triggered, such as: triggering an alarm output, sending an email, notifying a monitoring center, etc., depending on the configuration. Extensive analytic functions allow for more advanced projects, quick searches for events of interest, and smart recording that saves hard drive space.
Support for AcuSense cameras with Motion Detection 2.0
You can connect AcuSense series cameras equipped with Motion Detection 2.0 algorithm to the DVR. The motion detection system 2.0 can analyze detection events in terms of human or vehicle detection. Thanks to that, alarm notifications are filtered and unnecessary alarms are blocked. Recordings stored on the DVR, can be easily and quickly searched for human/vehicle criteria.
H.265 (+) compression
Compression is a very important parameter proving the device advancement. The better the compression, the lower the bandwidth requirement with the same subjective quality. H.265 (HEVC - High Efficiency Video Coding) is currently the most efficient compression method. Compared to its predecessor (H.264), it reduces the data stream and the demand for disk capacity by half. Therefore, hard drives with a halved capacity can be used, or recordings can be stored for twice as long. Its improved version H.265+ has been optimized for use in CCTV monitoring systems. They allow for further reduction of data streams.
iVMS-4200 client software
iVMS-4200 is client software dedicated to the management and supervision of Hikvision security systems, such as DVRs (IP, TurboHD), video intercoms, access control, set-top boxes, etc. The software allows you to easily and conveniently monitor all systems by offering viewing from IP cameras, remote playback of recordings, remote configuration, handling of alarm events, two-way audio transmission, e-map support, recording to a HDD and many more.
Access via P2P cloud - Hik-Connect application
A mobile application Hik-Connect is dedicated to operate Hikvision devices using cell phones with the operating system Android or iOS. It can be used to remotely view live video from DVR, NVR, network cameras, video intercoms using Wi-Fi, 2G or 3G networks as well as to view recorded video. Video intercoms can be operated with the application which additionally allows for remote opening of electric doors, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the resident. The application supports connectivity via IP and the P2P cloud. Hik-Connect is also the name of a cloud-based service that allows access to devices in the absence of an external IP address.

Continuity of recordings guaranteed thanks to the ANR function
The image from the IP camera is sent to the recorder as a data stream. Thanks to the support of the ANR (Automatic Network Replenishment) function, the Hikvision IP camera equipped with a microSD card can save recordings on it in the event of network failure, i.e. problems with communication between the camera and the recorder. After the problem is solved, the recordings are automatically synchronized with the recorder and marked with a different color on the playback bar. Such a solution guarantees the continuity of recordings and boosts the entire system performance.
Extensive applications for the organization and use of CCTV systems
Our library provides an overview of applications dedicated for installers and users of monitoring systems based on Hikvision devices.

SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software, its use and password recovery (par. 8) can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.
Specifikace:
Name/ModelHikvision DS-7608NI-I2/8P
CodeK22086
StandardIP
Number of channels
8
Built-in PoE switch
Yes, 8 ports
Max. input / output data stream [Mb/s]80 / 256
Remote connections
up to 128
HDD interface
Max. 2x 6TB SATA HDD
Video outputs
HDMI, VGA
HDMI/VGA resolution modes
HDMI: Max. 4k (3840 x 2160)
VGA: Max. 1080p (1920 x 1080)
Max. recording resolution12 MP
Synchronous playbackfrom 8 channels
Decoding (live preview)
2x 4k / 8x 1080p channels
S.M.A.R.T. disk monitoring
yes
Supported camera brands
ACTI, Arecont, AXIS, Bosch, Brickcom, Canon, PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek, ZAVIO, ONVIF or PSIA
Ethernet port
RJ-45 10/100/1000 Mb/s (Auto)
Video compression
H.265/H.264+/H.264/MPEG4
Recording options
Continuous, schedule, motion detection, VCA
ProtocolsTCP/IP, PPPoE, DNS, DDNS, NTP, SMPT, NFS, iSCSI, UPNP, RTSP
ArchivingUSB memory device, remote server
ANRyes
Audio IN/OUT
RCA 1 / 1
Alarm IN/OUT
4 / 1
Other connectors
USB 2.0, USB 3.0, RS-232
Mobile access platforms
Android, iOS, WindowsMobile
Compatible browsers
IE, Firefox, Opera, Safari, itp.
Operating temperature range-10°C ... 55°C
Power consumption
<15 W (without an HDD and PoE)
Supply voltage
230 VAC
Dimensions (W x D x H)380 x 290 x 45 mm
Weight3.5 kg

 

Cena bez DPHCena s DPHSlevaplatnost  
21062,40 Kč25485,50 Kč0 %
 
Síťové NVR 4K Hikvision DS-7608NI-I2/8P (8ch, 80Mbps, 2xSATA, Alarm IN/OUT, VGA, HDMI, 8x PoE)
Kód zboží: K22086