Podrobný popis
NETSET BOX U / UTP 6 ethernetový kabel zdaleka přesahuje požadavky pro kategorii 6 - kroucenou dvojlinku.
NETSET BOX U / UTP 6 ethernetový kabel zdaleka přesahuje požadavky pro kategorii 6 - kroucenou dvojlinku.
NETSET BOX is the latest generation of NETSET twisted-pair cables.
Its outer diameter has been reduced to 6.0 mm, which considerably facilitates installation of the data cable in trays and pipes. Special insulation material has been selected to make it easier to put on RJ-45 connectors.
Its outer diameter has been reduced to 6.0 mm, which considerably facilitates installation of the data cable in trays and pipes. Special insulation material has been selected to make it easier to put on RJ-45 connectors.
- nejkvalitnější materiály, přísná technologická kázeň potvrzuje 15-letou garanci kvality;
- parametry daleko přesahují požadavky pro zařazení kategorie 6;
- předběžná kontrola kvality materiálů a důkladné testy konečného výrobku;
- metrové markery, odchylka méně než 0.5%;
- pevné kabely s průměrem 0.54 mm (23 AWG);
- izolace drátů vyrobena z homogenního, vysoce izolačního, objemně-barevného HDPE: white-green / green, white-orange / orange, white-brown / brown, white-blue / blue;
- izolované vodiče stočené do párů, jak je uvedeno výše, navíc stíněné;
- stíněné páry stočeny dohromady;
- plášť vyrobený ze šedého PVC, vnější průměr 6.1 mm.
NETSET U / UTP Cat 6 E1608 LAN je vyráběn v souladu se standardy:
IEC 61156-6 (2000), ISO / IEC 11801 (2000), TIA / EIA-568-A (1995), EN 50173 (1999), yd / t1019-2001.
IEC 61156-6 (2000), ISO / IEC 11801 (2000), TIA / EIA-568-A (1995), EN 50173 (1999), yd / t1019-2001.
NETSET cables come with a 15-year warranty.
The manufacturer guarantees stability of the parameters given in the "Specifications" at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions (see the "Specifications" below).
Kabel NETSET U / UTP kategorie 6 E1608 může být použit v různém rozsahu teplot: -20oC...+70oC, a instalován mezi 0oC a +50oC. Minimální poloměr ohybu (poměr poloměr: průměr) je 8.
Specifications
Name | NETSET BOX U/UTP 6 |
Code | E1608 |
Structure | |
Conductors | solid copper wires Ø 0.54 mm (23 AWG) |
Wire insulation | PE |
Sheath/jacket | PVC (gray, RAL 7032) |
Outer diameter [mm] | 6.1 ±0.3 |
Electrical parameters | |
Wave impedance [Ω] | 100 ±15 |
Capacitance of any transmission path at 1kHz [nF/km] | 50 ±1 |
Nominal Velocity of Propagation (NVP) [%] | 67 |
Resistance of any transmission path [Ω/km] | ≤ 188 |
Asymmetry in capacitance of transmission paths to the ground [pF/km] | ≤ 1600 |
Insulation resistance [MΩ/km] | > 500 |
Installation and operation | |
Operating temperature range [oC] | -20...+70 |
Operating humidity range [%] | 0...100 |
Installation temperature range [oC] | 0...+50 |
Minimum bending radius [radius to diameter ratio] | >8 |
Cena za 1 metr.
Specifikace
Název | NETSET U/UTP cat. 6 | ||
Typ zboží | |||
Výrobce | Dipol | ||
Brand | NETSET | ||
Cable type | U/UTP | ||
Aplikace | |||
Category | 6 | ||
Cable length | m | Sold per meter | |
CPR class | Eca | ||
Fyzikální vlastnosti | |||
Žila | Material | Cooper | |
Diameter | mm | ||
Conductor insulation | Material | HDPE (polyethylene) | |
Diameter | mm | ||
Twisted pairs | colors | white-brown/brown, white-blue/blue, white-orange/orange, white-green/green | |
plášť | Material | PVC | |
Diameter | mm | ||
thickness | mm | ||
Barva | RAL7032 (gray) | ||
No | |||
Nosný kabel | No | ||
Rip-cord | Yes | ||
Spline | Yes | ||
Length marker print error | <0.5 | ||
Elektrické vlastnosti | |||
Impedance | Ω | 100 | |
Rychlost šíření NVP | 67 | ||
Delay skew | ns/100 m | <45 | |
DC resistance | Ohm/100 m | ||
Resistance asymmetry | <5 | ||
Return Loss | 1 MHz | ≥dB | 20 |
4 MHz | ≥dB | 23 | |
8 MHz | ≥dB | ||
10 MHz | ≥dB | 25 | |
16 MHz | ≥dB | 25 | |
20 MHz | ≥dB | 25 | |
25 MHz | ≥dB | ||
62.5 MHz | ≥dB | ||
100 MHz | ≥dB | ||
200 MHz | ≥dB | 18 | |
250 MHz | ≥dB | ||
Loss | 1 MHz | ≤dB | 2 |
4 MHz | ≤dB | ||
8 MHz | ≤dB | ||
10 MHz | ≤dB | ||
16 MHz | ≤dB | ||
20 MHz | ≤dB | ||
25 MHz | ≤dB | ||
31.25 MHz | ≤dB | ||
62.5 MHz | ≤dB | ||
100 MHz | ≤dB | ||
200 MHz | ≤dB | ||
250 MHz | ≤dB | ||
NEXT (near-end crosstalk) | 1 MHz | ≤dB | |
4 MHz | ≤dB | ||
8 MHz | ≤dB | ||
10 MHz | ≤dB | ||
16 MHz | ≤dB | ||
20 MHz | ≤dB | ||
25 MHz | ≤dB | ||
31.25 MHz | ≤dB | ||
62.5 MHz | ≤dB | ||
100 MHz | ≤dB | ||
200 MHz | ≤dB | ||
250 MHz | ≤dB | ||
PSNEXT (power sum near-end crosstalk) | 1 MHz | ≥dB | |
4 MHz | ≥dB | ||
8 MHz | ≥dB | ||
10 MHz | ≥dB | ||
16 MHz | ≥dB | ||
20 MHz | ≥dB | ||
25 MHz | ≥dB | ||
31.25 MHz | ≥dB | ||
62.5 MHz | ≥dB | ||
100 MHz | ≥dB | ||
200 MHz | ≥dB | ||
250 MHz | ≥dB | ||
ELFEXT | 1 MHz | ≥dB | |
4 MHz | ≥dB | ||
8 MHz | ≥dB | ||
10 MHz | ≥dB | ||
16 MHz | ≥dB | ||
20 MHz | ≥dB | ||
25 MHz | ≥dB | ||
31.25 MHz | ≥dB | ||
62.5 MHz | ≥dB | ||
100 MHz | ≥dB | ||
200 MHz | ≥dB | ||
250 MHz | ≥dB | ||
PSELFEXT (power sum far-end crosstalk) | 1 MHz | ≥dB | |
4 MHz | ≥dB | ||
8 MHz | ≥dB | ||
10 MHz | ≥dB | ||
16 MHz | ≥dB | ||
20 MHz | ≥dB | ||
25 MHz | ≥dB | ||
31.25 MHz | ≥dB | ||
62.5 MHz | ≥dB | ||
100 MHz | ≥dB | ||
200 MHz | ≥dB | ||
250 MHz | ≥dB | ||
Mechanické vlastnosti | |||
Provozní teplota | °C | -20...+70 | |
Teplota pokládky | °C | 0...+50 | |
Minimum bending radius for indoor installation | Diameter | >8 |